Home > Products > Ceramic tile lined pipe and fittings > High Alumina Ceramic Lined Conveying Wear Resistant Elbow
High Alumina Ceramic Lined Conveying Wear Resistant Elbow
- 1000 Piece / Pieces per Month
- Shanghai
- T/T L/C
Product Details
Place of Origin: | China | Thickness: | 10, 50 | Surface Treatment: | Other, Alloy Rare Earth Wear Resistant |
Alloy Or Not: | Is Alloy | Special Pipe: | Thick Wall Pipe | ||
Section Shape: | Round | Outer Diameter: | 100, 1000 |
Product Description
High Alumina ceramic lined conveying wear resistant elbow consist of three parts (steel pipe + adhesive + ceramic tiles), the steel pipe is made of seamless carbon steel pipe. Abrasion resistant ceramic tile lined steel pipes are applicable for the pneumatic powder-feeding, and can be used under a temperature of 350℃without aging and peeling for long life. The service life is 4-5 times than the normal abrasion-resistant pipes.
The pipe welding type ceramic technology of Wear resistant ceramic sheet pipe with holes is mainly used to solve the problem of anti wear of conveying system equipment under high temperature pneumatic force. It has the characteristics of super wear resistance, high temperature resistance, good toughness, strong impact resistance, and stud welding does not fall off.
Physical properties of ceramic tile lined pipe
Flexure strength | Tensile strength | Elongation | Cross section stretch Ratio | Impact toughness | Hardness of wearable layer | Hydrostatic testing pressure |
---|---|---|---|---|---|---|
MN/㎡ | MN/㎡ | % | % | J/c㎡ | HRC | Mpa |
>610 | >700 | 5 | 5.1 | >15 | >38 | 5.6-12.9 |
To achieve the best abrasion-resistant solutions, thicken ceramic liners can be used in the elbow which has serious abrasions.
Our Alumina Ceramic Lined Project has good wear resistance and impact resistance, the use of alumina wear resistant ceramic liner, can help extend the service life of the equipment, thus to reduce unnecessary maintenance costs. Because of its light weight and good welding performance. Therefore, welding, flange, fast connection and other methods can be used to facilitate the construction and installation. Our Alumina Ceramic Lined Project includes ceramic wire tube, elbow, cone, ceramic turret, ceramic-lined hydrocyclone, valves to help users obtain the maximum efficiency of the equipment.
Ceramic tile lined elbow fabrication technology principle, special corundum ceramics, made from Al2O3 as raw material, with rare metal oxides as solvents, and sintered at high temperature by 1730 ℃, are combined with wear-resistant ceramic pieces and block bricks in the pipe wearing surface through bonding, welding, inlay, riveting and socket technology. Thus forming a surface with excellent abrasion resistance, and the matrix still uses the composite pipe of the ordinary metal material.
According to different needs of the choice of wear-resistant ceramic patches, to meet the special needs of users of technical conditions. Compared with the traditional all-metal high alloy pipe fittings, the working face has higher abrasion resistance, which can make the whole wear-resistant and anticorrosion service life of the pipe increase several times to dozens of times times. Overall weight of the first mate down, reduce the amount of steel, reduce the cost of equipment and maintenance costs, improve economic efficiency.
Ceramic tile lined pipe is our company to absorb similar products at home and abroad on the basis of advanced technology developed a shell for the steel body, within the wear-resistant ceramic tube of the new composite pipe products, with high wear resistance long service life And so on
The use of anti-off porcelain tube, porcelain tube mosaic, so that paste more flat, more solid with a strong inorganic adhesive paste, wear-resistant steel bowl welding, porcelain and steel body combined to form a double reinforcement to ensure that the porcelain tube does not fall off. The installation of flexible, high wear resistance, processing convenience, the cost is moderate.
High hardness
Rockwell hardness of high alumina ceramics is up to HRA80-90 which is second only to diamond and far exceeds wear-resistant steel stainless
Excellent wear resistance
The wear resistance of high alumina ceramics is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. According to our investigation & follow-up to the clients, the service life of equipment can be prolonged over 10 times under the same working conditions.
Corrosion resistance
High alumina ceramics are inorganic oxides with extremely stable molecular structure and no electrochemical corrosion, thus they can resist erosion of acid, alkali, salt solutions and organic Solvents.
Thermostability
Working temperature of high alumina ceramics can be as high as 1400℃.
Good self-lubricity
High alumina ceramics have the properties of self-lubricity and in adhesion, the roughness is only 1/6 that of steel pipes thus less flow Resistance.
Light weight
The density of high alumina ceramics is about 3.6g/cm3, which is only half that of steel, thus easy for construction and installation.
Technology and structure of ceramic tile lined pipe
Ceramic tile lined pipe is composed of three layers: outer steel pipe layer, corundum layer, and ceramic glue layer. The inner ceramic layer is white from the surface. The ceramic is generally 95% ceramic, and the temperature is generally below 200°C.
At present, the common ceramic sheets lined with ceramic composite pipes are: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot and so on. It has the characteristics of wear resistance and long service life.
Performance
Large hardness
Rockwell hardness HRV 80-90High wear resistance
Wear resistance is equivalent to 20-30 times of high manganese steel.Light weight
Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment loadImported glue
Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃.
Specifications
Pipe diameter: ≥DN100
Steel pipe thickness: ≥4mm
Steel pipe material: Q235 or stainless steel
Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.
Connection method: flange, welding, casing, V-connector
Working pressure: ≤1.0 MPa (other pressures need to be communicated with customer service)
Ceramic tile technical indicators
Ceramic marking: 92-95
Bulk density: 3.9g/cm³
Tensile strength: 1030MPa
Flexural strength: 212MPa
Hardness HRV: 80-90
Contact Us
- Sunny Steel Enterprise Ltd.
- Contact nameSum Xuu
- Phone86-21-33780199
- Iron Square Pipe Tube / Black Iron Galvanized Square Pipe Zinc Steel Rectangular Gi Metal Galvanized Square Tube
- Customized Wholesale Galvanized Welded Pipe 2x4 S355 S275JR ERW Square Rectangular Steel Hollow Section Tube Pipe
- Best wholesale Q235B Carton steel square pipe Astm A36 A53 Carbon Steel Rectangular tube/pipe price
- ERW Hollow Section Square Rectangle galvanized Welded Steel Pipe Q355B
- Factory Outlet Super low price ASTM carbon steel pipe 20 cm square carbon steel seamless welded pipe
- Square Rectangle Round pipe Hollow Iron Pipe Welded Black Steel Pipe Tube
- Best price Cold Bending Welded Square Tube made in China factory
- Square tube carbon steel pipe black hollow section carbon steel Q235 square metal tube
- Factory supplier black carbon steel mild steel erw steel pipe welded pipes and square tubes
- 40x40 Structural Steel Square Pipe Ms Square Pipe Weight Welded Tube
- China Supplier Wholesale Steel Square Black Pipe Black Steel Square Welded Tube
- High quality hollow section carbon steel Q235 Galvanized square rectangular pipe
- VIT
- Factory Direct Sell Ms ERW Welded Carton Thick Wall Steel Pipe Seamless Hollow Section Steel Tube
- Welded Steel Pipes Stainless Carbon Steel Welded Pipe Erw Straight Welded Steel Pipe Round 304
- Factory Price round carbon steel pipe/tube welded pipe 2mm 4mm 6mm thickness
- Round welded pipes stainless steel pipe 201 304 316 stainless steel pipe
- Hot sale & high quality carbon round steel pipe welded round steel pipe carbon welded steel tube
- 14inch carbon steel pipe Seamless steel pipe and Welded steel pipe
- Manufacturer Direct Selling Stainless Steel Pipes welded Steel Micro Tube Round Steel Tube
- ASTM A53 Cold rolled pre galvanized welded round steel pipe SS400 hollow section prefab house steel tube
- Iron Pipe 6 Meter Welded Steel Pipe Round Erw Black Carbon Steel Pipe
- China Stainless Steel Decorative Hollow Pipe Seamless/Welded Round/Square Tube
- Seamless Steel Pipe And Tube Hot Sale High Quality Carbon Steel Round Seamless Pipe
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Pipes
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sum Xuu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-