Home > Products > Ceramic tile lined pipe and fittings > Weldable Ceramic Tile Lined Pipe
Weldable Ceramic Tile Lined Pipe
- 1000 Piece / Pieces per Month
- Shanghai
- T/T L/C
Product Details
Place of Origin: | China | Thickness: | 10, 50 | Surface Treatment: | Other, Alloy Rare Earth Wear Resistant |
Alloy Or Not: | Is Alloy | Special Pipe: | Thick Wall Pipe | ||
Section Shape: | Round | Outer Diameter: | 100, 1000 |
Product Description
With self-locking shape ceramic tiles installed into the bend or pipe by inorganic adhesive and as well as stud welding. This solution can prevent the tiles from high abrasion as well as falling off in high temperature under 750℃.
The pipe welding type ceramic technology of Wear resistant ceramic sheet pipe with holes is mainly used to solve the problem of anti wear of conveying system equipment under high temperature pneumatic force. It has the characteristics of super wear resistance, high temperature resistance, good toughness, strong impact resistance, and stud welding does not fall off.
Physical properties of ceramic tile lined pipe
Flexure strength | Tensile strength | Elongation | Cross section stretch Ratio | Impact toughness | Hardness of wearable layer | Hydrostatic testing pressure |
---|---|---|---|---|---|---|
MN/㎡ | MN/㎡ | % | % | J/c㎡ | HRC | Mpa |
>610 | >700 | 5 | 5.1 | >15 | >38 | 5.6-12.9 |
To achieve the best abrasion-resistant solutions, thicken ceramic liners can be used in the elbow which has serious abrasions.
Our Alumina Ceramic Lined Project has good wear resistance and impact resistance, the use of alumina wear resistant ceramic liner, can help extend the service life of the equipment, thus to reduce unnecessary maintenance costs. Because of its light weight and good welding performance. Therefore, welding, flange, fast connection and other methods can be used to facilitate the construction and installation. Our Alumina Ceramic Lined Project includes ceramic wire tube, elbow, cone, ceramic turret, ceramic-lined hydrocyclone, valves to help users obtain the maximum efficiency of the equipment.
Ceramic tile lined elbow fabrication technology principle, special corundum ceramics, made from Al2O3 as raw material, with rare metal oxides as solvents, and sintered at high temperature by 1730 ℃, are combined with wear-resistant ceramic pieces and block bricks in the pipe wearing surface through bonding, welding, inlay, riveting and socket technology. Thus forming a surface with excellent abrasion resistance, and the matrix still uses the composite pipe of the ordinary metal material.
According to different needs of the choice of wear-resistant ceramic patches, to meet the special needs of users of technical conditions. Compared with the traditional all-metal high alloy pipe fittings, the working face has higher abrasion resistance, which can make the whole wear-resistant and anticorrosion service life of the pipe increase several times to dozens of times times. Overall weight of the first mate down, reduce the amount of steel, reduce the cost of equipment and maintenance costs, improve economic efficiency.
Ceramic tile lined pipe is our company to absorb similar products at home and abroad on the basis of advanced technology developed a shell for the steel body, within the wear-resistant ceramic tube of the new composite pipe products, with high wear resistance long service life And so on
The use of anti-off porcelain tube, porcelain tube mosaic, so that paste more flat, more solid with a strong inorganic adhesive paste, wear-resistant steel bowl welding, porcelain and steel body combined to form a double reinforcement to ensure that the porcelain tube does not fall off. The installation of flexible, high wear resistance, processing convenience, the cost is moderate.
High hardness
Rockwell hardness of high alumina ceramics is up to HRA80-90 which is second only to diamond and far exceeds wear-resistant steel stainless
Excellent wear resistance
The wear resistance of high alumina ceramics is 266 times that of manganese steel and 171.5 times that of high chromium cast iron. According to our investigation & follow-up to the clients, the service life of equipment can be prolonged over 10 times under the same working conditions.
Corrosion resistance
High alumina ceramics are inorganic oxides with extremely stable molecular structure and no electrochemical corrosion, thus they can resist erosion of acid, alkali, salt solutions and organic Solvents.
Thermostability
Working temperature of high alumina ceramics can be as high as 1400℃.
Good self-lubricity
High alumina ceramics have the properties of self-lubricity and in adhesion, the roughness is only 1/6 that of steel pipes thus less flow Resistance.
Light weight
The density of high alumina ceramics is about 3.6g/cm3, which is only half that of steel, thus easy for construction and installation.
Technology and structure of ceramic tile lined pipe
Ceramic tile lined pipe is composed of three layers: outer steel pipe layer, corundum layer, and ceramic glue layer. The inner ceramic layer is white from the surface. The ceramic is generally 95% ceramic, and the temperature is generally below 200°C.
At present, the common ceramic sheets lined with ceramic composite pipes are: ceramic block, dovetail mutual pressure, welding type, mosaic, card slot and so on. It has the characteristics of wear resistance and long service life.
Performance
Large hardness
Rockwell hardness HRV 80-90High wear resistance
Wear resistance is equivalent to 20-30 times of high manganese steel.Light weight
Its density is 3.9g/cm³, which is only half that of steel, which can greatly reduce the equipment loadImported glue
Magbao imported glue, bonding strength: 10Mpa, working temperature: -60℃ to +250℃, welding type, wear resistance up to 800℃.
Specifications
Pipe diameter: ≥DN100
Steel pipe thickness: ≥4mm
Steel pipe material: Q235 or stainless steel
Ceramic thickness: 4mm, 6mm, 8mm, 10mm, etc.
Connection method: flange, welding, casing, V-connector
Working pressure: ≤1.0 MPa (other pressures need to be communicated with customer service)
Ceramic tile technical indicators
Ceramic marking: 92-95
Bulk density: 3.9g/cm³
Tensile strength: 1030MPa
Flexural strength: 212MPa
Hardness HRV: 80-90
Contact Us
- Sunny Steel Enterprise Ltd.
- Contact nameSum Xuu
- Phone86-21-33780199
- A106 Hot Rolled Seamless Steel Pipe A53 Carbon Tube
- ATSM A53/A106 carbon seamless square and rectangular steel tube with low price
- Mining machinery cold bending welded square and rectangular steel tube with high performance and low price
- China factory direct cold bending round welded steel pipe with high precision
- Non-Alloy Cold drawn seamless round steel pipe with China factory direct and high precision
- SA106C high-temperature and high-pressure seamless steel pipe 273 * 14 American standard seamless pipe execution standard ASME SA106/SA106M
- 15crmoG alloy seamless steel pipe 60 * 4 seamless pipe for high-pressure boiler GB/T5310-2017
- Seamless steel pipe 325 * 8 for high-pressure fertilizer pipeline No. 20 GB/T6479-2013
- ASTM A53 Carbon Steel Seamless Pipe
- Carbon Steel Pipe A106 Gr. B
- High quality Stainless Steel Pipe Square/Round Steel Pipe High Quality Seamless Steel Pipe
- Good Quality 50mm*50mm 100mm*100mm Hollow Section Rectangular S235 S275 Stainless Steel Square Steel Pipe
- Hollow cross-section black iron square steel pipe ERW technology JIS certification structural application length 6m
- Best-Selling China Manufacture ASTM AISI A36 Carbon Square Steel Pipe
- ASTM/ASME A333GR.6 American Standard Seamless Steel Pipe 508 * 9.53 American Standard Seamless Pipe for Low Temperature Pipelines
- ASME A3335P91 alloy high-pressure boiler tube 114.3 * 8.56 seamless steel pipe
- SA-106Gr C seamless steel pipe 159 * 16 SA-106M standard
- 06Cr18Ni11Ti stainless steel seamless steel pipe 273 * 10 GB/T14976-2012
- Q345D seamless steel pipe 325 * 12 seamless pipe for high-pressure fertilizer equipment GB/T6479-2013
- Seamless steel pipes for 16MnDG low-temperature pipelines GB/T18984-2016 219 * 6
- 09crcusb alloy seamless steel pipe 38 * 3 ND steel
- Mining machinery cold drawn seamless square and rectangular steel tube with high performance and low price
- various specificatipns high strength special-shaped steel pipe with support customization and competitive price
- Specifications Seamless Pipe 45# Large Diameter Thin Wall Seamless Pipe Seamless Steel Pipe
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Pipes
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sum Xuu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-