High Quality Oil Filters Element AF26676 Oil Filters Auto Parts

high quality oil filters element AF26676 oil filters auto parts

SHIPPING: 

Part 1. About Filter Efficiency:

High-efficiency filters can capture finer impurity particles better than ordinary filters. Therefore, the high efficiency filter can slow down the wear and cylinder pulling caused by impurities entering the engine system. The following photos show the amount of dirt intercepted and filtered by Torch filters and general filters after 5,000 kilometers.

The picture on the left shows the impurity particles intercepted by our products, and the picture on the right shows the impurity particles intercepted by other inferior products.

Part 2. About Filter Paper Quality:

All filter papers look the same to the naked eye, but photo micrographs can let you see the difference between different filter papers. For inferior filter papers, they can only intercept relatively coarse particles and impurities, and will allow finer particles and impurities to enter your engine system and damage the life of your engine system.

The picture on the left is the magnified picture of the high-quality filter paper microscope used in our products, and the picture on the right is the picture of the filter paper microscope of the other inferior products.

Part 3. About Adhesion of filter Paper and End Cap:

Inferior filters have poor airtightness, causing impurities to slip into the engine system of our car from the bond between the filter paper and the end cover. This is because the filter loses its filtering function and cannot protect the relevant parts in our engine system.

The picture on the left is an enlarged view of the bonding of our filter, and the picture on the right is an enlarged view of the bonding of other inferior products.

Part 4. About Metal Burrs:

If burrs or tiny metal impurities exist on the inner side of the general filter housing, they can directly enter the engine system without obstruction, causing damage and abrasion to the precision parts of the engine.

The picture on the left is our company’s filter without any burrs; the picture on the right is a general filter with more metal burrs.

Part 5. About Assembly Bite:

If the seal ring seat of the filter and the bite of the housing are not strong enough, it will cause leakage under slightly higher pressure. The bite of our company's oil filter is stronger, safer, and more reassuring.

The picture on the left is our company’s bite design, which is more sturdy; the picture on the right is a general filter bite design, which is easy to cause leakage

Part 6. About Seal Ring Quality: