Long Distance 12M Detector Sensor HM412 From Senba Factory
Overview
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.
Feature
Higher in cost-performance
Long range
Wide angle
Technical Data
1. Maximum Ratings
Characteristics |
Symbol |
Min. Value |
Max. Value |
Unit |
Remarks |
Working Temperature |
TST |
-20 |
85 |
℃ |
|
Max.current |
Into |
-100 |
100 |
mA |
|
Storage Temperature |
TST |
-40 |
125 |
℃ |
2.Working Conditions (T=25°C, Vdd=3V,Except other requirements)
Characteristics |
Symbol |
Min. |
Type |
Max. |
Unit |
Remarks |
Supply Voltage |
VDD |
2.2 |
3 |
3.7 |
V |
IR=0.5mA |
Working Current |
IDD |
9 |
9.5 |
11 |
μA |
|
Sensitivity threshold value |
VSENS |
80 |
μV |
|||
Output REL | ||||||
Output Low Current |
IOL |
10 |
mA |
VOL |
||
Output High Current |
IOH |
-10 |
mA |
VOL>(VDD-1V) |
||
Output Low current Lock time |
TOL |
2 |
s |
Non-adjustable |
||
Output High current Lock time |
TOH |
2 |
3600 |
s |
||
Input SENS/ONTIME | ||||||
Voltage Input Range |
0 |
VDD/2 |
V |
0V to VDD/2 |
||
Input Bias Current |
-1 |
1 |
μA |
|||
Oscillator & Filter | ||||||
Low pass filter cut-off frequency |
7 |
Hz |
||||
High pass filter cut-off frequency |
0.44 |
Hz |
||||
Oscillator frequency on Chip |
FCLK |
64 |
kHz |
|||
Interior Block Diagram |
|
|||||
Applications
Wireless Devices/Mobile Equipment
Wireless occupancy sensors (powered by PV cells or battery)
PC and smart phones
Commercial & residential lighting fixtures
Video intercoms
Vending machines
Home automation
FAQ
1.How long do motion sensor lights stay on?
Most people set their motion detection lights so they will stay on for about one to two minutes.
2.Do motion sensors save electricity?
Motion sensing switches do have some “phantom” energy use. According to this study, motion sensor switches use about a watt of energy on standby mode (23 hours a day) and 5 watts on active mode (about an hour a day). This trims a bit off of your overall savings.
Senba is a professional pir sensor manufacturers, we provide passive infrared sensor, long distance pir sensor, long range pir, long distance motion detector, long range pir detector, long range ir motion detector, long range light sensor, china infrared sensor and etc. Want to know more? Please contact us.
Send Inquiry to This Supplier
You May Also Like
-
Fresnel LensUS$ 0.1 - 6MOQ: 1000 Pieces
-
High Quality Diam 7mm Light Resistor for Outdoor Solar Garden Light GL7537-1US$ 0.1 - 6MOQ: 1000 Pieces
-
LDR PhotoresistorsUS$ 0.1 - 6MOQ: 1000 Pieces
-
Linear Light SensorUS$ 0.1 - 6MOQ: 1000 Pieces
-
Optocoupler Semiconductor Device LCR-0202 Series for Electric CircuitUS$ 0.1 - 6MOQ: 1000 Pieces
-
Outdoor Human Motion Sensor D203SUS$ 0.1 - 6MOQ: 1000 Pieces
-
PIR Sensor ModuleUS$ 0.1 - 6MOQ: 1000 Pieces
-
High Quality Diam 7mm Light Resistor for Outdoor Solar Garden Light GL7537-1US$ 0.1 - 6MOQ: 1000 Pieces
-
High Quality LDR Electric Circuit φ12 for Street Lamps From Senba ManufacturerUS$ 0.1 - 6MOQ: 1000 Pieces
-
Diam 5MM Photoresistor φ5series for Led DimmerUS$ 0.1 - 6MOQ: 1000 Pieces
