High molecular weight succinimide

The high molecular weight ash free material is prepared from high activity polyisobutylene (Mn=2300) by thermal adduction

Dispersant.With good dispersion and solubilization of soot and sludge, it can effectively inhibit the increase of engine oil viscosity

Long.The product does not contain chlorine.It is mainly used to make API SG grade and above grade high grade gasoline oil, also can be used to make

API CF-4 or above grade of high - grade diesel oil, suitable for the modulation of environmental protection internal combustion engine oil

● Good dispersibility of low temperature sludge ● good dispersibility of clean soot ● good dispersibility of soot ● Chlorine free

Reference dosage: 2.0-5.0 (quality score) / %

Technical parameters

Test method for project quality index

The appearance of viscous transparent liquid is visually detected

Density (20℃)/(kg/m3) 905 SH/T 0604

Flash point (opening) / ℃ 190 GB/T 3536

Kinematic viscosity (100℃)/(mm2/s) 350 GB/T 265

Total base value (in KOH)/(mg/g) 24 SH/T 0251

Nitrogen (mass fraction) /% 1.05 GB/T 9170

This product implements the enterprise standard Q/YHT 77-2015

Product packaging

200l standard iron drum, product net weight 170Kg/ drum;In bulk.

Product storage, transportation and safety

Refer to SH/T0164 for storage, transportation, loading and unloading and oil blending of this product.This product is not flammable, no

Explosion, non - corrosion.The maximum storage temperature should not exceed 75℃;For long-term storage, the maximum temperature should not exceed 45℃.

Refer to the relevant chemical safety data Sheet for product safety, user health and environmental considerations.