Home > Products > Pipe Extrusion Lines > PVC Large Big Diameter Drainage Pipe Tube Production Extrusion Line
PVC Large Big Diameter Drainage Pipe Tube Production Extrusion Line
- 1000 per Month
- T/T Credit Card
- HDPE PE Steel Wire Composite Pipe Making Production Machine
- ppr pipe machine line 3 layers double machine plastic pipe extruder
- plastic hdpe pe double wall corrugated pipe extruder machine
- pex aluminum composite tube pipe making machine/pipe production line for pex-al-pex
- china best selling pex al pex plastic aluminium pipe production machine
- PEX AL PEX Aluminum Composite Pipe Production Machine line (Plant)
Product Description
PVC Large Big Diameter Drainage Pipe Tube Production Extrusion Linee
No | Machine Name | Brief introduction |
1 | Extruder | Can use one or several extruders to produce multi-layer pipes or to increase capacity to produce pipe with very big size. Color line extruder is to produce color line on pipe surface. |
2 | Die head | Can choose single layer die head or multi-layer die head to produce pipe with single layer or multi-layer |
3 | Vacuum tank | Structure has single chamber and double chamber. Different length for different extruder capacity and pipe sizes. |
4 | Cooling tank | Can have several coolings tanks for better cooling effect. |
5 | Haul off unit | Based on pipe sizes, have two, three,four, six, eight, ten, twelve or sixteen even more claws. Traction speed is designed based on extruder capacity and pipe sizes. Customer can choose servo motor. |
6 | cutting unit | Have saw cutting, planetary saw cutting and knife cutting for choice. |
7 | Stacker | Length of stacker can be customized. |
8 | Coiler | To make small diameter pipe into the roll. |
Note: machine can be customized base on customer requirements. Our company chooses the most suitable machine configuration based on customer requirement. |
Summary
Pipe Specification and Sizes | |
Outer diameter (mm) | Wall thickness |
110mm | PN6, PE100 |
PN8, PE100 | |
PN10, PE100 | |
160mm | PN6, PE100 |
PN8, PE100 | |
PN10, PE100 | |
200mm | PN6, PE100 |
PN8, PE100 | |
PN10, PE100 | |
250mm | PN6, PE100 |
PN8, PE100 | |
PN10, PE100 |
Practical line speed (m/min)
Practical line speed (m/min) | |
Minimum size (110mm, PE100, PN6) | Maximum size (250mm, PE100, PN10) |
4.0 m/min to 0.5 m/min | |
Material is PE100 virgin material, extrusion grade. Note: according to different circumstances (cooling water temperature, etc) and operator skills, line speed will have 10% difference. |
Machine information
Raw materialMachine information | |
Raw material | PE (polyethylene) |
Pipe range | Ø110-250mm |
Operation direction | From right to left (facing the control panel) |
Center height | 1000 mm |
Machine color | Xinrong standard color (white) |
Cooling water | consumption 8 m³/h ( ≤20℃,≥0.3MPa ) |
Water pool volume | 12 m³ (prepared by customer) |
Compressed air consumption | 0.8 m³/min ( >0.5MPa ) |
Power supply | 3 phase 380V( ±10% ) 50Hz |
Total power | 210 kW |
Actual power consumption | 130 kW |
Overall dimension | 45000×3000×3200 mm |
Electrical control parts | Control system: adopt Siemens touch screen and PLC. All operation parameter and status are controlled, reflected and shown in the touch screen. |
DC speed regulator: Eurotherm U.K | |
Inverter: ABB or BOSCH-REXROTH | |
Low-voltage electrical parts: Schneider | |
Temperature controller: RKC, Japan | |
Heater: Magal ceramic heater | |
Working condition | Working place: indoors |
Power supply: no dangerous area | |
Temperature: -15-40℃ | |
Humidity: 85% no condensation | |
Wire and cable | Wire and cable between electric cabinet and each machine unit is included in the machine. Wire between electric cabinet and workshop power supply should be prepared by customer. |
Water hose | Water hose from water pool to machine, and from machine back to water pool should be prepared by customer. |
Labor required for operation | 2-3 persons |
Machine list
No | Item | Quantity |
1.0 | Single screw extruder, model SJ60×38 | 1 Unit |
1.1 | Auto dryer, loader | 1 Set |
2.0 | Extrusion die head, model LXGM250 | 1 Unit |
2.1 | Bush | 4 pcs |
2.2 | Mandrel | 12 pcs |
2.3 | Calibrator | 4 pcs |
3.0 | Co-extruder, model SJ30×25 | 1 Unit |
4.0 | Vacuum tank, model ZDL250 | 1 Unit |
4.1 | Vacuum sealing device | 1 Set |
4.2 | Pipe clamping device, model GJC250 | 1 Unit |
5.0 | Cooling tank, model PLX250 | 2 Units |
5.1 | Spraying sealing device | 2 Sets |
6.0 | Caterpillar haul-off, model LDQY250 | 1 Unit |
7.0 | Dust free knife cutter, model WXQG250 | 1 Unit |
8.0 | Stacker, GCL250 | 1 Unit |
9.0 | Free spare parts | 1 Set |
Quantity Payment: 30% T/T down payment, balance T/T before shipment. Delivery time: 60 days after down payment arrival and sales contract confirmed Guarantee: One year Validity: 30 days |
Main Technical Parameter
1.0 Single screw extruder, SJ60×38
Feature: Advanced overall design of direct combination. Efficient screw and spiral water cooling sleeve in barrel, can realize extruding material in low melt temperature in high speed. Relation between capacity and screw rotation speed is nearly linear, stable extrusion, high reliability, easy for operation. | |
Technical parameter: | |
Output capacity (max) | ≈360kg/h (vary with different materials and pipe size) |
Motor power | 90KW (DC) |
DC speed regulator | Eurotherm U.K With high and low voltage protection, current overload protection, short circuit detection, etc. |
Screw, barrel | Material: 38CrMoAlA Treatment: nitriding, polishing, depth of nitriding 0.45-0.65 mm, surface hardness HV800-900 Screw diameter: Ø60 mm L/D: 38:1 With spiral structure and water cooling in feeding part of barrel, ensure stable material feeding and extrusion, increase output. |
Reduction gearbox
| Material of main box: QT400 Material of gear: 20GrMnTi Accuracy of gear: 6 grade, HRC56-62 of face, core material hardness: HB265 Lubrication system: circulating oil enforced by oil pump, infiltration and splash in oil basin With plate heat exchanger to cool the gear oil by transmit heat to the cooling water inside the exchanger. |
Heating power | 4×7KW With ceramic heater, have longer life which can be 8 years. Special designed structure, bigger ceramic surface, easy for cooling. |
Cooling power | 4×0.37KW enforced air cooling |
Control system | Siemens touch screen and PLC English and Chinese interfaces are interchangeable Operation parameter and status are integrated into the touch screen, can setup and revise rotation speed, traction speed, melting temperature and each zone temperature, etc. |
1.1 Auto dryer, loader
Technical parameter: | |
Conveying type | vacuum suction |
Conveying capacity | 500 kg/h |
Motor power | 2.2 kW |
Hopper dryer | quality aluminum alloy outside and stainless steel inside |
Dryer volume | 150 kg |
Heating power | 8.8 kW heating temperature controlled automatically |
2.0 Extrusion die head, model LXGM250
Technical parameter: | |
Die head structure | Spiral type Ensure melt temperature uniformity, thoroughly eliminate confluence seam and reduce flaws such as bubble, black spot, unsmooth inside wall, caused by too high temperature. |
Die head material | 40Cr, forgings with tempering treatment |
Bolt grade | 12.9 grade high strength bolt |
Heating power | 36kW, magal alloy ceramic heater |
Flow channel surface | nitriding and polishing, heating treatment hardness HRC52-56 |
Pipe range | Ø110~250mm |
2.1 Bush
Feature: Processed by CNC, achieve precise dimension and realize stable extrusion. | |
Technical parameter: | |
Material | 40Cr, forging with tempering treatment |
Pipe specification | Ø110, 160, 200, 250mm 4pc |
Feature and Technical parameter: Processed by CNC, achieve precise dimension and realize stable extrusion. | |
Material | 40Cr, forging with tempering treatment |
Pipe specification | Ø110, 160, 200, 250mm (for PE100, PN6) Ø110, 160, 200, 250mm (for PE100, PN8) Ø110, 160, 200, 250mm (for PE100, PN10) 12pcs |
2.3 Calibrator
Feature: Processed by CNC, achieve precise dimension and ensure accurate pipe size. | |
Technical parameter: | |
Material | bronze |
Pipe specification | Ø110, 160, 200, 250mm (for PE100, PN6, 8&10) 4pcs |
Above is one part details of Xinrong PE pipe machine, if you want to know about the PE pipe machine, please feel free contact me by Email or whatsapp: 0086 13151186226
Every pipe line is designed and made according to your pipe diameter and PN level, and you pipe usage. So please send us this pecifications for we making the pipe lines for you.
One pipe line can produce different pipe size by changing molds. please send us all your required pipe sizes, please!
My Phone/Whatsapp/Wechat Contact is as below:
0086 13151186226
Contact Us
- Jiangsu Xinrong Science & Technology Development Co., Ltd.
Auxiliary machines | Meltblown machine | Pipe Extrusion Lines | Plastic Recycling And Granulating Line |
Profile Extrusion Lines | Sheet/board Extrusion Lines | Ungrouped |
- PPR AL PPR/PEX AL PEX Ultrasonic Overlap Welding Multilayer Polyethylene Aluminum Composite Pipe Making Machine
- Plastic HDPE pipe production line for HDPE pipe extruding plastic extruder PE pipes machine
- Big diameter300-2600mm PE steel belt reinforced spiral corrugated plastic pipe making machine
- PEX/Aluminum composite pipe production Line
- Pvc Electric Conduit Pipe Making Machine
- Better plasticization machine, pvc pipe machine india pvc extrusion machine
- Xinrong machinery produced high speed hdpe pipes extrusion product line
- 2017 best selling PE HDPE seamless pipe manufacturing production making extruding machine on prime price with turnkey project
- 2017 best selling PE HDPE drip irrigation pipe making machine on prime price with turnkey project
- Plastic PE/HDPE/PPR/PP Water Supply/Drainage Pipe/Tube/Conduit/Culvert Making Manufacturing Production Extrusion Machine Line
- ISO9001 Plastic PVC Pipe Manufacturing Process, Extrusion Machine
- RTP Extruder Line Machinery Producing Reinforced Pipe Processing Equipment
- Xinrong oil and gas supply RTP fiberglass reinforce pipe machine
- PVC+ASA/PMMA glazed roof tile production machine
- PVC+ASA/PMMA glazed roof tile making machine
- PS/GPPS diffuser panel LED panel extrusion machine
- Xinrong cable trunking Machine Manufacturing Production PVC Wood Profile Extrusion Line
- Xinrong manufacture pvc cable trunking water stop pvc strap tape production machine
- Xinrong high quality conical twin screw extruder machine pvc cable trunking production line
- Xinrong conical twin screw 51/105 extruder machine pvc cable trunking production line
- Xinrong pvc cable trunking production machine pvc profile extrusion line
- Xinrong pvc cable trunking production machine pvc wood panel extrusion line
- PVC Cable Duct Extrusion line machine
- Twin screw extruder pvc profile cable trunking making machinery production plant
Popular Searches
- plastic extruder
- extrusion machine
- twin screw extruder
- aluminum tube production line
- production line
- extruding machine
- Production Equipment
- extrusion line
- Belt Making Machinery
- Extruder Machine
- Pet Strap Making Machine
- Bubble Film Making Machine
- Cable Manufacturing Equipment
- plastic extrusion
- plastic machinery
- Cable Extruder Machine
Find Similar Products By Category
- Machinery > Plastic & Rubber Machinery > Plastic Product Making Machinery > Plastic Extruders
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-