Home
Product Categories

Drone Accessories

Wood products prototype

Vacuum casting parts

Ungrouped

Transparent part

Shoe prototype

Robot models

Plastic Shell

Other Bicycle Parts

Hot customizable products

Electric products prototype

3D Printing

Custom toy models

Custom parts

Custom KeyCaps

Custom keyboards

CNC Wood Machining

CNC plastic parts

CNC metal parts

Car models

Building models
Company Profile

Company Introduction

Photo Gallery
Blog
Quality Control
Contact Us

Home > Products > Vacuum casting parts > Small batch auto part plastic mold prototype vacuum casting formed mold plastic rubber service prototype manufacture service

Small batch auto part plastic mold prototype vacuum casting formed mold plastic rubber service prototype manufacture service

FOB Price

Negotiable

1 (Min.Order)

Supply Ability 1000 per Month
Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Description

None color rubber

Seal

Rubber ring

Rubber Cartoon electronic product

Industry rubber part

Rubber Sole

Master mold

Why you choose this process from us?

1.The mold can be use for copy 100- 200 times, when you pay the cost for opening the mold for the few sample ,after your test, if you want to copy more quantity later , the mold can be reserved in our factory will not charge extra fee.

2.For the rubber part ,it can custom the shore from 35-65 °
3.Both rubber and the plastic material color can be customized.

4. Transparent material like Arylic and PC can be used in this process, and the semi transparent rubber is also available.

Plastic products by vacuum casting

How many processes needs to go ?

Silicone mold (also called vacuum casting) is one of the ways to make prototype in small batch. Using one set of silicone mold can make more than 200 pieces the same products. The prototype material can be PP, PC, ABS, PMMA, POM, high temperature resistant material, soft rubber, silicone rubber and so on. The advantage of this silicone molding is that the time is fast, the cost is little, the probability of failure is small. Silicone mold small batch vacuum casting production process can be divided into three steps. 1. Before making silicone mold, need to produce a prototype. Making prototype usually use more common ABS materials. CNC machining, 3D printing are the common ways to make the prototype.

2. After prototype is ready, then to start making silicone mold. Using board to surround the prototype, and pour the vacuum silica gel into the board surrounding area, until the silica gel covers the prototype. 3. Put the mold into the oven for baking. Eight hours after drying, the silica gel cutting open, remove the prototype. At this time the silicone mold ready. 4. After vacuum pumping the silicone mold, then pour the required material into silicone mold, until the mold cavity is filled out. After cooling, take the prototype out of the silicone mold. Then the prototype is done.

Vacuum casting or low volume production involves making a mold out of silicone rubber, usually based upon a master model created by CNC machining or one of our rapid prototyping services. Vacuum casting is a low-cost but reliable method for making a small number of high-quality prototypes based on a master model. This method is ideal for rapid prototyping used in engineering testing, proof-of-concept and display demos to name a few.

There is a low initial cost since it doesn’t require investment in tooling. Low-volume manufacturing up to 100K pcs may be a great way for you to avoid a large investment while still producing high-quality parts. If the tool steel doesn’t need to be so durable then it will be more economical for you to purchase and faster for us to heat treat and machine. And, if your tool wears out during production and you need to have another one made, we do that at no extra charge!

Molds can be ready in a few days once the master model has been created low-volume manufacturing is the ideal way for you to make enough volume to be sellable without creating an unsustainable burden of inventory. In addition, with optimized supply chains for low volumes, the lead times are short with parts ready to go in a matter of days or weeks – not months – so you’ll have a quicker route to market.

Many different molding polymers are available that can be pigmented to meet your color requirements. During production, you may find some aspect of the design that you want to modify. Low-volume manufacturing lets you make those changes without greatly impacting the total order.

Another benefit of low-volume manufacturing is that it provides a way for you to scale up to eventual full-scale production. That’s why it’s sometimes known as bridge production or bridge tooling. As volumes progressively increase, you have an opportunity to streamline best practices to achieve further cost savings while improving product quality.

1.Making The 3D Printed Master Model

Vacuum casting requires the use of a master model, from which copies are then made. We created the master by taking the client’s CAD data and 3D printing it using stereolithography (SLA).

2.Making The Vacuum Casting Mold

The vacuum casting mold is built around the master model. We will use it to make replicas of the original. Molds are made one-half at a time, each half cured in an oven at 70° C for 15 hours. It’s important at this time that our technicians carefully arrange the location of gates (for filling the mold cavity) and overflows (which let excess plastic and trapped air to escape).

3.Making The Vacuum Casted Copies

Step 1: Filling The Mold

Similar to plastic injection molding or pressure die casting, vacuum casting uses liquid resin poured into an empty cavity (the vacuum casting mold) to make prototype copies. The first step is to fill this mold, using simple filling spouts that our technician removes after the part is cured. Vents inside the mold help air to escape so that the cavity is filled completely. This air will later be evacuated out of the mold when it goes into the vacuum chamber.

Step 2: Unsealing The Prototype

We used pins and staples to hold the mold together while the resin was cured in the oven. We also used high-temperature tape to seal all sections of the mold tightly together. We were very careful when unsealing the mold, so as not to damage the soft silicone which can be used many times before it must be replaced.

Step 3: Opening The Mold

Many kinds of liquid resins can be used for vacuum castings, from very soft elastomers to hard engineering-grade plastics. For these copies, we tried polyurethane PX223 resin in black. This plastic is safe for food handling and will resist the high temperatures involved in making popcorn.

Step 4: Reusing The Mold for Up to 50 Prototypes

Notice the wavy cut pattern on the different mold sections. This ensured they were in the correct alignment for every casting, creating identical finished parts each time. Cutting the mold in three sections also helped to release the handle without damaging the mold. With care, a silicone mold can make 50 or more copies before it must be replaced. Of course the master model can be used to make an indefinite number of vacuum casting molds.

Step 5:Testing Clarity of Part Features

Vacuum casting provides excellent fidelity even to small part features. Notice the clarity of the “twist” logo on the handle, and how it was correctly reproduced in the casting.

Step 6:Testing Different Colors

Another advantage of vacuum casting is that it’s easy to test out different resins in various colors. The orange stirrer paddle was cast in a high-temperature polyurethane plastic. This is a great way to go through several design iterations to find the look and feel that’s just right, which is exactly what you want a prototype for.

GuangZhou GaoJie Model Design & Manufacturing Co.,LTD is professional in 3D printing, CNC machining and Vacuum casting fields, which has more than 15 years export experiences, a leading 3d printing enterprise in China, we have cooperated with many famous companies, look forward to becoming your trusted long-term Chinese supplier!

FAQ

Q: Are you trading company or factory?

A1: We are factory.

Q: How to get a quote?
A2: Please send your 3d drawing(STP, IGS, STL, OBJ, X-T...) to us, and tell us the material, surface treatment and quantity, then we will quote within 2 hours.

Q: Can I order one piece for testing?
A3: Yes.

Q: How long is your delivery time?
A4: 3 to 4 work days

Q: What is your terms of payment?
A: Payment<=1000USD, 100% in advance. Payment>1000USD, 50% T/T in advance ,balance before shipment.

Contact Us

Guangzhou Gaojie Model Design And Manufacturing Co., Ltd.

*Email
Please enter Your valid email address.
*To

Guangzhou Gaojie Model Design And Manufacturing Co., Ltd.
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Drone Accessories	Wood products prototype	Vacuum casting parts	Ungrouped
Transparent part	Shoe prototype	Robot models	Plastic Shell
Other Bicycle Parts	Hot customizable products	Electric products prototype	3D Printing
Custom toy models	Custom parts	Custom KeyCaps	Custom keyboards
CNC Wood Machining	CNC plastic parts	CNC metal parts	Car models
Building models

Small batch auto part plastic mold prototype vacuum casting formed mold plastic rubber service prototype manufacture service

You May Like