Home > Electrical & Electronics > Switch > Other Switches > NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car

NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car

NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car photo-1
NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car photo-2
NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car photo-3
NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car photo-4
NEKEKE MT084 300A Auto Selector 3 Position Blue Sea 6008 Battery Switch For Marine Boat Yacht Car photo-5
US$ 15 - 25 MOQ: 50 Pieces
Key Specifications
Get Latest Price
Brand Name:
Nekeke
Place of Origin:
China
Model Number:
MT084
Payment & Shipping
Payment Methods:
Port of Shipment:
Yantian/Shenzhen or Hongkong
Delivery Detail:
Delivery time depends on order quantity.
Brand Name Nekeke
Place of Origin China
Model Number MT084

Specifications

Features

• Switches a single battery to a single load group banks to all loads

• Tin-plated copper studs for maximum conductivity and corrosion resistance

• Studs accept 3/8" (M10) ring terminals

• One-piece terminal stud design never loosens over time

• Isolating cover with three snap-off side pieces protects rear contacts and allows wire access in any direction

 

Specifications

Cranking Rating: 30 sec.  900A DC

Intermittent Rating: 5 min. (UL 1107)   500A DC

Continuous Rating:  300A DC

Terminal Stud, Tin-Plated Copper  3/8”-16 (M10)

Torque  120 in-lb (13.56 N·m)

Cable Size to Meet Ratings*  4/0 AWG (120 mm²)

Maximum Voltage Rating  32 Volts DC

Ignition Protected marked

 

Agency Specifications

 Meets all American Boat and Yacht Council (ABYC) requirements for battery switches

• UL Listed - UL 1107 for electric power switches

• Meets UL 1500 and SAE J1171 external ignition protection requirement

 

Guarantee

Any Blue Sea Systems product with which a customer is not satisfied may be returned for a refund or replacement at any time.

* Reducing cable sizes will reduce current ratings

 

Caution

• Disconnect positive battery terminal before installing.

• Débranchez la cosse positive de la batterie avant de l’installer.

• Desconecte el terminal positivo de la batería antes de la instalación.

• Prima di eseguire l’installazione, disconnettere il terminale positivo della batteria.

• Consult marine electrical professional for proper wiring application.

• Consultez un professionnel de l’électricité marine pour installer le câblage correctement.

• Consulte a un electricista marino profesional para la aplicación de alambrado apropiada.

 

Installation

• Refer to the latest edition of NFPA 302 and/or ABYC E11 Standard for installation information.

• Attach one 4/0 AWG cable per terminal to meet ratings.

• Raccordez un câble 120 mm² par cosse pour respecter les spécifications.

• Sujete un cable 120 mm² por terminal de acuerdo a la clasificación.

• Attaccare un cavo 120 mm² per conformarsi alle tarature.

• Battery cable terminals must be attached under nut. Torque 120 in-lb (13.56 N·m).

• Les cosses des câbles de batterie doivent être fixées sous la rondelle de sûreté et l’écrou – couple de serrage de 13,56 N·m (120 lb-po).

• Los terminales de los cables de batería deberán ser sujetados debajo de la tuerca y la arandela. Apriételos a una torsión de 13,56 N·m (120 lbs-pul).

• I terminali del cavo della batteria vanno attaccati con un dado e una rondella elastica: coppia di 13,56 N·m (120 lbs-in).

• Per assicurarsi che i cavi siano correttamente collegati, rivolgersi ad un elettricista specializzato in motori marini.

 

Operation

• Turn all appliances off before turning the battery switch to OFF.

• Éteignez tous les appareils électriques avant de mettre l’interrupteur de batterie sur ARRÊT.

• Apague todos los artefactos antes de girar el interruptor de batería a APAGADO (OFF).

• Spegnere tutte le apparecchiature prima di muovere l’interruttore della batteria su OFF (spento).

• Do not switch to OFF while engine is running.

• Ne le mettez pas sur ARRÊT alors que le moteur tourne.

• No coloque el interruptor en APAGADO (OFF) mientras que el motor esté funcionando.

• Non muovere l’interruttore su OFF (spento) quando il motore è in moto.


Product Description



Our advantages   
Service:

1.Good communication

2.Good after-sale services

3.Reliable quality and competitive prices

4.Convenient transportation and fast delivery.

5.One stop source, all related products requirements can be sourced from our company.

Contact Us

NEKEKE
Tel:0086-755-84530813
WhatsApp:008613724390917
Web:
Skype:gw-jenny
Contact:Ms.JennyLee

Product Tags: Battery Switch , Cut off kill switch , Isolator Switch , Yacht Accessories

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Port of Shipment
Yantian/Shenzhen, HK
Main Markets
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe, South Asia, Domestic Market