QSFP28 100G SR4 100M

QSFP28 100G SR4 100M

The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MTP/MPO connector.

Features of 100G QSFP28 SR4 100m

4 channels full-duplex transceiver modules

Transmission data rate up to 25Gbps per channel

4 channels 850nm VCSEL array

4 channels PIN photo detector array

Hot-pluggable QSFP28 form factor

Maximum link length of 70m on OM3 Multimode Fiber(MMF) and 100m on OM4 MMF

Single 1X12 MPO connector receptacle Hot-pluggable electrical interface

0–70°C operating temp

Low power consumption <2.5W

RoHS6 compliant (lead-free)

Applications of QSFP28 100G SR4 100m

100GBASE-SR4 100G Ethernet

Specifications of QSFP28 100G SR4 100m

Recommended Operating EnvironmentOptical Transmitter PerformanceOptical Receiver Performance

Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter Symbol Min Typical Max Unit

Power Supply Voltage VCC 3.135 3.300 3.465 V

Operating Case Temperature TC 0 25 70 °C

Pin Descriptions of QSFP28 100G SR4 100m

Pin Definition of QSFP28 100G SR4 100m

Pin Symbol Name/Description

1 GND Ground

2 Tx2n Transmitter Inverted Data Input

3 Tx2p Transmitter Non-Inverted Data Input

4 GND Ground

5 Tx4n Transmitter Inverted Data Input

6 Tx4p Transmitter Non-Inverted Data Input

7 GND Ground

8 ModSelL Module Select

9 ResetL Module Reset

10 Vcc Rx +3.3 V Power supply receiver

11 SCL 2-wire serial interface clock

12 SDA 2-wire serial interface data

13 GND Ground

14 Rx3p Receiver Non-Inverted Data Output

15 Rx3n Receiver Inverted Data Output

16 GND Ground

17 Rx1p Receiver Non-Inverted Data Output

18 Rx1n Receiver Inverted Data Output

19 GND Ground

20 GND Ground

21 Rx2n Receiver Inverted Data Output

22 Rx2p Receiver Non-Inverted Data Output

23 GND Ground

24 Rx4n Receiver Inverted Data Output

25 Rx4p Receiver Non-Inverted Data Output

26 GND Ground

27 ModPrsL Module Present

28 IntL Interrupt

29 Vcc Tx +3.3 V Power supply transmitter

30 Vcc1 +3.3 V Power Supply

31 LPMode Low Power Mode

32 GND Ground

33 Tx3p Transmitter Non-Inverted Data Input

34 Tx3n Transmitter Inverted Data Input

35 GND Ground

36 Tx1p Transmitter Non-Inverted Data Input

37 Tx1n Transmitter Inverted Data Input

38 GND Ground

Important Notice of QSFP28 100G SR4 100m

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by T&S before they become applicable to any particular order or contract. In accordance with the T&S policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of T&S or others. Further details are available from any T&S sales representative.

T&S Communications is a professional fiber optic accessories suppliers, we provide plc splitter 1x32, qsfp28 sr4 and etc. Want to know more? Please contact us.