Contact Platform Support
Help CenterSilicone Spray Adjuvant for Crop Protection Products Herbicide Pesticide Fungicide and Plant Growth Regulators Cas:134180-76-0
Related Products
-
Silicone Surfactant for Agricultural - Silway APGNegotiableMOQ: 5 Liters -
Silicone Spray Adjuvant Polyether Trisiloxane Plant Growth Regulator Gives Super Spreading and Does Dramatically Reduce Surface Tension in Aqueous SolutionsNegotiableMOQ: 200 Kilograms
-
Silicone Spray Adjuvant for Better Wetting Spreading and PenetratingNegotiableMOQ: 200 Tons
-
Silicone Spray Adjuvant for Plant Growth Regulators (CAS: 67674-67-3) Silicone SurfactantNegotiableMOQ: 200 Tons
-
Silicone Spray Adjuvant Silway 246D Plant Growth Regulator 134180-76-0 for Better Wetting Spreading PenetratingNegotiableMOQ: 200 Kilograms
Description:
Silway 240 spray adjuvant is a polyether trisiloxane. In aqueous solutions, it gives super spreading and does dramatically reduce surface tension.
Typically, Silway 240 spray adjuvant reduces the surface tension of aqueous agricultural mixtures significantly.
At concentrations as low as 0.1 percent, Silway 240 spray adjuvant reduces surface tension below 22 mN/m, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves.
Silway 240 spray adjuvant is nonionic in nature, making it useful with a broad range of agrochemical formulations.
Key Features:
· Superspreading for exceptional spray coverage of crop and plant surfaces
· Up to 70% spray volume reduction to lower water use and application costs
· Excellent penetration providing better pesticide uptake and efficacy
· Better spray treatment adhesion on crop and plant surfaces
· Rainfastness to lower pesticide wash-off and waste
· Lower use levels than non-silicone surfactants
· Nonionic
Typical Application & Typical use rate:
| Crop protection products | 0.015% to 0.1% |
| Herbicides | 0.025% to 0.15% |
| Insecticides | 0.025% to 0.1% |
| Fungicides | 0.015% to 0.05% |
| Nutrients and plant growth regulators | 0.025% to 0.05% |
Typical Physical Properties:
| Proprety | Result |
| Surface Tension (0.1%, mN/m) | 22.0 |
| Cloud Point (0.1 wt%, ºC) | 35 |
| Viscosity (cSt, 25ºC) | 60 |
| Specific Gravity (25/25 ºC) | 1.020 |
Packing:
1L, 5L, 25kg, 200kg or IBC tank
Storage:
Being storage in closed containers
Shelf life : 36 months
Send Inquiry to This Supplier
You May Also Like
-
Silicone Antifoam Emulsion Excellent Foam Control for Sewage Treatment Industrial Cleaning and Crop Protection ProductsNegotiableMOQ: 200 Tons
-
Dimethyl Silicone Oil Silway 520 Polydimethylsiloxane Polymer Manufactured for Personal Care ApplicationNegotiableMOQ: 200 Kilograms
-
Polydimethylsiloxane Aqueous Emulsion-Silway5260-Nonionic Emulsion for Rubber Plastic Parts Mold Release Polish Ingredient for Car/Furniture Textile LubricantNegotiableMOQ: 200 Kilograms
-
Polydimethylsiloxane Aqueous Emulsion-Silway5260-Nonionic Emulsion for Rubber Plastic Parts Mold Release Polish Ingredient for Car/Furniture Textile LubricantNegotiableMOQ: 200 Kilograms
-
Silway 732 Silicone Water Repellent - for Gypsum Board Waterproof and for Long Chain in ReactionNegotiableMOQ: 200 Kilograms
-
Silicone Water Repellent Silway 715 - 52% Soild Content of Potassium Methyl Siliconate for Masonry Surfaces Waterproof TreatmentNegotiableMOQ: 200 Kilograms
-
Silicone Oil Silway 660 a Long-Chain Alkylaralkylpolysiloxane Soft Metal Release Agent With Many Excellent PropertiesNegotiableMOQ: 200 Kilograms
-
Alkyl Aralkyl Modified Silicone Oil Silway 630 - Wetting and Dispersing Agent for Pigments and Fillers ChemicalsNegotiableMOQ: 200 Kilograms
-
Rubber Tire Mould Release Agent Silway 680 - for All Kinds of Tire Mold Release With Excellent Lubricant AdhesionNegotiableMOQ: 200 Kilograms
-
Silicone Water Repellent Silway 713 Surface Treatment for Masonry Surfaces Bricks Sandstone Limestone and CeramicsNegotiableMOQ: 200 Kilograms
