50kg Metal Melting Furnace With Vaccum Induction Heating

50kg Metal Melting Furnace With Vaccum Induction Heating

Vacuum induction melting furnace is mainly used for the melting in vacuum or protective atmosphere. The raw material can be silver-base alloy, nickel-base alloy, steel alloy, special stainless steel, oxygen-free copper, rare earth Nd-Fe-B, and other metal materials.

Furnace composing:

1. Furnace lid, translational device

2. Furnace body, crucible, tilting device

3. Ingot mould lifting device

4. Vacuum system( oil-perssured pump, roots pump, slide valve pump)

5. Silicon controlled rectifier medium frequency power supply, PLC control cabinet

Furnace Features:

Furnace lid, body, bottom all use double layer water cooled structure to keep the temperature of furnace shell not more than 60°C. Manual open mode of furnace lid, on which is set with a sightglass and a baffle for the convenience of adding alloy element in melting process, also with an alloy charger. The furnace has a induction coil inside, which can easily pure the molten metal into ingot mould through manual rotating the handle outside. Ingot mould can be designed of water cooled mode. On the top of crucible is set a temperature measuring device.

Vacuum Induction Melting Furnace

Furnace chamber with coil inside

Vacuum Induction Melting Furnace Testing Site

Vertical vacuum induction melting furnace