Contact Platform Support
Help Center010.35.559 Four Point Contact Ball Slewing Bearing Without Teeth 431.8x695.452x90.932mm
Related Products
-
011.20.250 Belong to Four Point Contact Ball Slewing Bearing With External Teeth 352x170x60mmUS$ 200 - 1000MOQ: 4 Pieces -
Offer 013.32.1405 Four Point Contact Ball Slewing Bearing With Internal Gear 1525X1235X119mmUS$ 200 - 1000MOQ: 4 Pieces
-
061.25.1120.301.11.1523 Four Point Contact Ball Slewing Bearing With External Gear 1013X1278X79mmUS$ 200 - 1000MOQ: 4 Pieces
-
Four Point Contact Ball Slewing/turntable Bearing 232.20.0600.503 With Size 948x734x56mmUS$ 200 - 1000MOQ: 4 Pieces
-
585DBS164Y Slewing Bearing 585x810x85mm Belong to Four Point Contact Ball Bearing With Internal TeethUS$ 200 - 1000MOQ: 4 Pieces
010.35.559 four point contact ball slewing bearing without teeth 431.8x695.452x90.932mm
010.35.559 four point contact ball slewing bearing without teeth belong to China slewing bearing standard.we can offer the dimension 431.8x695.452x90.932mm 010.35.559 bearing.
010.35.559four point contact ball slewing bearing specification as follows:
Slewing bearing type 010.35.559
Boundary dimension: 431.8x695.452x90.932mm
Outer dia: 695.452 mm
Inner dia: 431.8mm
Height 90.932mm
Oil nipple: yes
Seal: double side seal
Soft zone: Yes
Plug: yes
Slewing bearing type |
010.35.559 |
Boundary dimension: |
431.8x695.452x90.932mm |
Outer dia: |
695.452 mm |
Inner dia: |
431.8mm |
Height |
90.932mm |
Oil nipple |
yes |
Outer ring and inner ring material |
42CrMo,50Mn |
Ball material |
GCr15 |
Ball brand |
LYC |
Seal material |
NRC |
010.35.559 slewing bearing material and heat treatment:
The heat treatment of the gear teeth is Normalised (N), the hardness of raceway is HRC58-64 After quenched and tempered. The 010.35.559 slewing ring material is 50Mn OR 42CrMo.
Storage and storage life of slewing rings 010.35.559 :
Bearings should only be stored lying down, never standing up
The storage life of the bearings is limited by the storage life
of the grease. Experience shows that the greases with a mineral
oil base used can be stored for up to 3 years if the following
preconditions are met:
■ closed storage room
■ dry, clean rooms with temperatures between 0 ºC and +40 ºC
■ relative atmospheric humidity not more than 65%
■ no influence by chemical agents such as vapours, gases, fluids.
After long storage periods, the frictional torque may temporarily be higher than that of freshly greased bearings. The lubricity of the grease may also have deteriorated.
Send Inquiry to This Supplier
You May Also Like
-
MTE-730 Four Point Contact Ball Slewing Bearing China Supplier 41.85x28.75x3.25 Inch SizeUS$ 200 - 1000MOQ: 4 Pieces
-
MTO-324T Belong to Four Point Contact Ball Slewing Bearing Without Teeth520.3x323.85x52.4mmUS$ 200 - 1000MOQ: 4 Pieces
-
Slewing Bearing China Factory Offer 20.0644.200- PNN the Size:716x572x56mmUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.23.0741 Slewing Bearing With Flange 848*634*56mm for Cargo Truck EquipmentUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.061.20.0844 Slewing Ball Bearing With External Teeth 772x950.4x56mmUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.061.20.0944 Four Point Contact Ball Slewing Bearing SpecificationUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.162.14.0744 Crossed Roller Slewing Bearing 816*649.2*56mm in Stock With TeethUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.060.25.1204 Four Point Contact Slewing Bearing Belongs to Medium Size Without a GearUS$ 200 - 1000MOQ: 4 Pieces
-
Slewing Ring Turntable Bearing RKS.060.25.1314 Size 1399x1229x68mm no GearUS$ 200 - 1000MOQ: 4 Pieces
-
RKS.060.25.1534 Turntable Bearing Swivel Ring 1449X1619x68mmUS$ 200 - 1000MOQ: 4 Pieces
