UV resistance UHMWPE sheet/panel/plate/board

We are looking forward to your inquiry.

Best regards

Baron from Xinxing

UHMWPE. (also known as Ultra High Molecular Weight Polyethylene). These products are manufactured from the polyethylene (PE) family and consists of a minimal weight which supports the performance of the sheet.

UHMWPE is available in various grades of material depending on what its intended use. It is available in various colours and grades also, depending on its intended use.

Advantages

UHMWPE properties ensure that the sheets are light, extremely tough in uses of extreme wear and/or resistance.

• Bearings
• Concrete Moulds
• Drip pans
• Chute linings
• Bulk storage
• Material handling
• Mechanical bearings
• Food machinery and equipment

UV resistance UHMWPE sheet/panel/plate/board, uv resistant plastic/uv resistant UHMWPE

Ultra High Molecular Weight Polyethylene (UHMWPE) is a resin based product having molecular weight greater than 4million gm. /mol. It is important that we do not confuse UHMWPE with High-Density Polymer (HDPE) because HDPE does not exhibit superior wear characteristics as UHMWPE due to its lower molecular weight. As the molecular weight of polyethylene increases, its abrasion resistance and non-stick characteristics are enhanced. These liners are extensively used all over the world as ideal flow promotion liners.

Application :Chutes, silos, Bins, Launders for fines handling declaimer buckets conveyor skirting etc. where the surface to be lined needs excellent flow ability and abrasion wear resistance.

UHMWPE can be produced as bearing, axle sleeve, gear, airproof-piece and other parts. These products can be used in the field of Textile machinery, food machinery, packing machinery, Electric appliance, transport machinery

Port, ship machinery: ship parts, side rollers, wear resistant blocks and other parts for bridge cranes;General machinery: various gears, bearing shells, bushings, sliding plates, guide bodies, elastic couplings, rollers, riding wheels, sliding parts

Transport machinery: slide block, spout, fixed plate, timing sprocket of transmission machinery;Food machinery: filling machine bearings, parts of bottle grabbing machine, washer guide pins, cylinders, gears, rollers, chain wheel handles;Papermaking

Ultra high molecular weight polyethylene (UHMWPE) spare parts, wire rodsHigh wear-resistant, corrosion-resistant, impact-resistant and self-lubricating ultra high molecular weight polyethylene (UHMWPE) has excellent wear resistance, self lubrication

The UHMWPE profiles using polyethylene with 1.5~4 million molecular weight has an outstanding performance, including wearability, self-lubrication, low temperature bearing, impact bearing, not caking, anti-corrosion and low water-absorptivity

As UHMW-PE has an extremely low friction coefficient (0.1-0.22), its self lubrication is excellent. Dynamic friction factor is 1/2 of PA66 and POM under water lubrication conditions.

Wear resistance of UHMWPE is the highest among the plastics, which is several times that of the carbon steel, brass.When the molecular weight reaches 1.5 million, the impact strength of UHMW-PE reaches the maximum value which is the highest value 

UHMWPE has excellent chemical resistance and can bear various corrosive media, such as, acid, alkali, salt (unstable in concentrated sulfuric acid, concentrated hydrochloric acid, concentrated nitric acid, halogenated hydrocarbon

UHMWPE has excellent low temperature resistance which is the best among the existing plastics. It still has ductility at liquid helium temperatures (-269 centigrade); therefore, it can be used as low-temperature component

Water absorption rate of UHMW-PE is very low, which is generally less than 0.01% and 1% of PA66. Therefore, drying is not necessary before molding, and products` dimensional changes in humid environments will not occur due to water absorption

Applications of UHMWPE are very extensive and it mainly applies to following aspects:1, Building machinery, agriculture machinery, mining machinery; e.g. liners for silos, hoppers, dump trucks, railcars and chutes.2, Transporting machinery

The UHMWPE profiles using polyethylene with more than 3 million molecular weight has an outstanding performance, including high abrasion resistance, high impact strength, very low coefficient friction and good self-lubricants properties

 1. Outstanding impact strength.2. Excellent sliding abrasion resistance.3. low coefficient of friction.4. Nonstick, self-lubricating properties.5. Good corrosion resistance.6. Excellent anti-aging.7. Hygienic and nontoxic.8. Light weight

As ultra high molecular weight polyethylene (UHMWPE) has good wear resistance, impact resistance, self lubrication and less noise, it is suitable for making various wear-resistant mechanical parts.It can be widely used in mining, shipbuilding, coal 

Having excellent performance of wearability, corrosion endurance, impact resistance, self-lubrication, UHMWPE sheet may be used to manufacture hopper, lining of runner for powder. Adhesion will not happen to equipment, which assure the stable transportation

UHMWPE concave-convex connection plate.The extrusive concave-convex connection plate of UHMWPE has a lot of outstanding performance, whose molecular weight is about 3 million it`s including high abrasion resistance , high impact strength 

Ultra high molecular weight polyethylene is abbreviated as UHMWPE. UHMWPE generally refers to polyethylene whose relative molecular weight is above 1.5 million (relative molecular weight of common polyethylene is only 20,000-300,000).

Service life of ultra high molecular weight polyethylene(UHMW-PE) is higher than that of steel. Its wear resistance is 4-7 times that of the carbon steel and stainless steel. UHMW-PE has the characteristics of small friction coefficient, self lubrication