ZKJG 400/500/630 tubular stranding machine fully enclosed safety cover stranding machine

Product Information：Stranding machine is a kind of stranding machine which can be widely used in all kinds of soft/hard conductor wires.

Sphere of application：It is used for making copper strand, Aluminium Strand, steel strand, Aluminium conductor steel-reinforced cable and wire rope strand. It can also be used for the stranding of insulated wire core and part of control cable.

Equipment composition：Center lay-out frame, pipe cutter host, winding machine (select) , traction device, take-up and lay-up device and electrical system.

Product benefits:

1.The cylinder body is supported by front and rear bearings and is placed on the bottom plate of the integral casting for stable operation. 

2. The setting-out tension can be controlled by mechanical feedback, magnetic powder and hysteresis.

Points to note：

1.On the line after the line to check whether the front end of the wire rack top tight, locked. 

2.During configuration operation, no one is allowed to stop or move within the designated configuration damage area, not beyond the operating part.

3. Configuration operation, the need to observe the setting-up of the inventory line environment, the same general can not be observed in the middle of the stranding, need to be observed in the head or tail of the stranding, in case of accidents.

4. Configuration operation, not allowed to wipe configuration and exclusion, not allowed to shift gear.