Xray Diffraction Analyzes XRD Xray Diffractometer

X-ray Tube (domestic or imported)

Target: Optional targets such as Cu, Fe, Co, Cr, Mo, W (metal or ceramic optional)

Focus Size: 1×10 mm 2 or 0.4 × 14m m2

Rated power: 2.4kW or 2.7kW (ceramic tube

or metal cermic tube technology)

X-ray Generator (PLC control)

Maximum output power: 3kW high frequency

high voltage generator (domestic /import)

X-ray tube voltage: 10-60kV, 0.1kV/step

X-ray tube current: 5~50mA, 0.1mAVstep

Output stability: ≤0.01% (power supply fluctuation±10%)

Goniometer

Goniometer structure Hollow shaft vertical

goniometer θs-θd structure (sample level is fixed)

Goniometer scanning radius: Standard 225mm (150~285mm continuously adjustable)

Scanning range: -110°~160°

Scan speed: 0.006°~120°/min

Positioning speed: 1200°/min

Drive mode: θs-θd linkage, θs-θd single

Scan mode: Stepping, continuous, segmentation, transmission scannin

Minimum step angle: 0.0001°

measurement accuracy: ≤0.001°

2θ angle repeatability: 0.0002°

Recording control unit (Detector)

Detector Type: Array Detector

Maximum linear count rate: up to 1X10℃cps (noise diffraction intensity is more than 100 times that of SC DCS controller readout time is only 89µs

Dynamic range: [bit] 24

Energy range [keV]4-40 *

Read time: [µs] 89

Energy resolution (rms): [eV]687±5

Safety Protection Alarm

KV and mA are too high or too low, overload protection, no water alarm, X-ray tube over-temperature and other multiple protection, to prevent radiation leakage, protective door interlock protection and platform lead shielding protection

X-ray leakage

≤0.1µSv/h (maximum power of X-ray tube, without subtracting the background)

Stability

≤0.5%(40kV, 40Ma, continuous for 8 hours)

Dimensions(main body)

1170mmx870mmx1800mm (LengthxWidthxHeight)

Transmission

Industrial Ethernet