DW-CXC-06 Crude Fiber Grain Analyzer Manufacturer

DW-CXC-06 Crude Fiber Analyzer

DW-CXC-06-type crude fiber analyzer is based on the current commonly used acid-base digestion sample, and the weight of the sample to obtain the crude fiber content of the instrument.

DW-CXC-06-type crude fiber analyzer using the exact concentration of acid and alkali, under certain conditions, digestion of samples, and then remove the ethanol soluble substances, after high temperature burning after deducting the amount of minerals, the content of crude fiber. It is not an exact chemical entity, but only in the recognized mandatory conditions measured under the rough ingredients, of which the main cellulose, there are a small amount of hemicellulose and lignin.

DW-CXC-06 crude fiber analyzer for a variety of food, feed and other crude fiber content determination, the test results are in line with GB / T5515, GB / T6434 requirements.

Specifications:

1. Determination of the object: all kinds of feed, grain, grain, food and other raw materials to be determined crude fiber content;

2.The number of samples per batch: 6pcs;

3. repeatability error:

Crude fiber content below 10%, the absolute error ≤ 0.4;

Crude fiber content of more than 10%, the relative error ≤ 4%;

4. the determination of time: the instrument required about 90min (including acid 30 minutes, alkali 30 minutes, pumping and washing about 30 points);

5. The power supply voltage: 220V ± 10V  

 frequency :50Hz;

6. Electric heating power: 3.3KVA;

7. Dimensions (mm): 540×450×670 mm ;

8. Weight: 28kg.