Portal Steel Structure Hangar

The plane layout and height requirements of the hangar are special, which directly affects the structure of the hangar.
Due to the large span of the hangar, the structural weight (mainly the roof system) accounts for a large proportion of the total load.
If the structural weight can be reduced, obvious economic benefits can be achieved.
The steel structure hangar has the advantages of high strength, light weight, small section, good weldability, and simple manufacturing process.

The hangar uses the advantages of tents for flexible and rapid deployment, low cost of ownership, repeated disassembly and assembly, wide application range, diverse and flexible shapes, rich selection of materials and accessories, and personalized customization, providing a cost-effective solution for aviation hangars; Design and customize professional-level hangar tents and overall equipment plans for different models.

1. The whole hangar adopts a steel structure frame. The surroundings can be equipped with hard ABS board walls and sandwich board walls. The entrances and exits can be equipped with blue flexible retractable doors and sliding doors. The overall appearance is beautiful and the safety performance is high. The wind resistance can reach 120 km/h (wind load 0.7 kN/m²), and the structure is sturdy and durable.
2. The support is made of high-strength aluminum alloy 6061/T6, hardness HW≥14, aging oxidation, tensile strength: 290Mpa, yield strength: 270Mpa, elongation: 13%;
3. The roof tarpaulin material adopts shading double-sided PVC synthetic fiber cloth, which is pre-stretched, tarpaulin and aluminum alloy bracket;
    The surface is tight after connection, completely isolated from ultraviolet rays, waterproof, the thickness of the fabric is 0.76mm, and the weight is 1100g/㎡;
    Tensile strength (warp/weft): 3553/2939N/5cm, tear strength (warp/weft): 462/348N,

    peel strength Degree (longitude/latitude): 118/116N/5cm, applicable temperature: -30℃ to +70℃.

Supply Ability:  100000 Square Meter/Square Meters per Month steel structure workshop

• Packaging Details

• steel structure hangar
  1) Steel structure components will be in nude packaging with proper protection.
  2) Sandwich panels will be packed with plastic film.
  3) Doors and windows will be packed with bubble plastic.
  4) Bolts and other accessory will be packed in wood boxes.
  Normally is 40’HQ and 40’OT container.
  If you have specifical requirements,40GP and 20GP container is ok.

• Port

• QINGDAO  PORT/LIANYUNGANG PORT/SHANGHAI  PORT

• Lead Time :

• Quantity(Square Meters)	1 – 2000	2001 – 5000	5001 – 10000	>10000
  Est. Time(days)	25	35	45	To be negotiated

1) Customized design is welcomed.

2) We have an excellent design team. According to the requirements of different projects and clients,we will supply different designs and steel products.In order to give you an exactly quotation and drawings, please let us know the following informations. We will quote for you promptly.

Basic design requirements of steel structure hangar

   Engineering Design Software:

  AutoCAD,PKPM,MTS,3D3S,Tarch,Tekla Structures(Xsteel)V12.0.etc

• Quick and flexible assembly.

All the components will be prefabricated in the factory before transported to the construction site. The installation process is quick and easy.

• Cost- effective.

It will significantly shorten the construction period of your buildings, saving a great deal of time and money.

• High safety and durability.

The steel structure has light weight but high strength, which is also easy to maintain. It can be utilized for over 50 years.

• Optimal design.

The prefab steel workshop can be isolated against outdoor environments as well as avoid any leak like water seepage. It also has excellent fire resistance and corrosion resistance.

• High utilization.

It is easy to move and relocate steel structure, which can also be recycled without pollution.

• Solid construction.

The steel structure fabrication workshop is capable of withstanding the attack of strong winds and heavy snow. It also has excellent seismic performance.

The steel columns and steel beams of the internal frame are made of H-shaped steel through bolt connection. This kind of building has light weight, high strength and large span. The exterior wall panels are made of lapped colored steel veneers, with a service life of 50-100 years. The attachment is made of colored steel, which has a good sealing effect. The wall and roof of the hangar are maintained by glass wool sandwich panels. The hangar has strong fire resistance and avoids fire. The main frame of the hangar is connected by bolts, which is simple to install. We can provide for installation. Technical Support. Regarding the transportation of the steel components of the hangar, we use the whole packing box to avoid the damage of the steel components during the transportation.