Water Content Tester
DSY-013A is designed to determine the water in the range from 0 to 25% volume in petroleum products, tars and bituminous materials by the distillation method.
Characteristics:
1. Two samples can be tested at one time
2. Adjustable clamp device to locate and fix freely
3. Heater jacket has good thermal insulation, high efficiency
4.SSR control the voltage that is stable and reliable
Specifications:
Standard Test Methods | ASTM D95 GB/T 260 |
Heating Power Range | 0~470 W x2 |
Glass Flask | 500ml x2 |
Receiver | 10ml X2 |
Condenser | 300mm x2 |
Dimensions | 430 × 260 × 560 (mm) |
Weight | 12 kg |
Power Supply | AC220 V±10% 50/60Hz 940W |
Send Inquiry to This Supplier
You May Also Like
-
High Temperature High Shear Rate Apparent Viscosity TesterNegotiableMOQ: 1 Set
-
Copper Strip Corrosion TesterNegotiableMOQ: 1 Set
-
Automatic Oxidation Stability Tester for Distillate Fuel OilNegotiableMOQ: 1 Set
-
Distillation TesterNegotiableMOQ: 1 Set
-
Close Cup Flash Point TesterNegotiableMOQ: 1 Set
-
Automatic Close Cup Flash Point TesterNegotiableMOQ: 1 Set
-
Automatic Open Cup Flash Point TesterNegotiableMOQ: 1 Set
-
Open Cup Flash Point TesterNegotiableMOQ: 1 Set
-
Abel Close Cup Flash Point TesterNegotiableMOQ: 1 Set
-
Distillation TesterNegotiableMOQ: 1 Set