What Is The Operating Procedure Of Pet Food Extruder?

Pet food can be broadly divided into dry food and wet food. Among them, dry pet food is usually made by twin-screw extruder. The most common method is to pulverize raw materials such as grains and animal by-products and enter the extruder for extruding. The steam and water injected during the pressing process, and finally the drying material is sprayed with grease and protein digestion or flavoring substances to enhance the pet’s acceptance of food. What Is The Operating Procedure Of Pet Food Extruder?

Install the template, tighten the bolts evenly and firmly, check whether the cutter is neat and firm, connect the cutting device with the template, lock the four locks, adjust the distance between the blade and the template to make it evenly close to the template, lock the adjustment wheel, and close Make the two-sided access door and connect the socket cable of the cutting device.

The conditioner is turned on by-pass, and when the current of the main machine is proper, the frequency of the main machine is reduced to “0”, then the main motor is turned off, and the cutter motor is turned off.

 Disassemble the mold, clean the template, pour into the washing machine water, clean the puffing cavity, clean the inner wall and the discharge port.