Suction Strainer Element 10 Micron SUS Suction Oil Filter
Description of suction oil filter
Suction strainers are located in the inlet of the pump. The strainer removes contamination from the reservoir fluid before it reaches the pump and the system components. These filters should be set up with an internal bypass valve to prevent starving the pump. Note: these are usually
threaded.
Application
Engine and turbine lube, compressor lube and seal oil, cooling water, process water, and
chemicals.
Pictures of Suction oil filter
Main products
Pressure filters are located downstream of the pump. It is exposed to full system pressure. The filter removes contamination generated or passed by the pump. An exceptionally contamination
sensitive component may be protected by a “ point of use filter” located immediately upstream
of it.
Return line filters are located downstream of the pump and system components and upstream of the system reservoir. The return filter removes contamination generated or ingested by the
pump and components before the fluid returns to the reservoir.
About us
...
Send Inquiry to This Supplier
You May Also Like
-
FFU( Fan Filter Unit & Purifying Equipment )NegotiableMOQ: 1
-
Seawater Desalination SystemUS$ 2000 - 1000000MOQ: 1 Set
-
Swivel Fittings Thread Protective Caps Hydraulic Line Hose Ro Membrane End CapsUS$ 0.05 - 0.11MOQ: 1 Piece
-
Industrial Water Filtering MachineNegotiableMOQ: 1 Set
-
High Efficient Industrial Water Sand FilterUS$ 1,000 - 3,000MOQ: 2 Sets
-
Original New HFCN-8400+ HFCN-8400 High Pass FilterUS$ 1 - 2MOQ: 10 Pieces
-
Ultraviolet Water SterilizerNegotiableMOQ: 1000 Sets
-
High Strength Aluminum Water Alumina Filtering BlockNegotiableMOQ: 5000 Pieces
-
6 Stages UV Lamp RO Water FilterNegotiableMOQ: 200 Sets
-
Rotary Vibrating Screen for Paper PulpUS$ 400 - 10,000MOQ: 1 Set







