Contact Platform Support
Help CenterAuto Fakra Antanna Adapter Cable
Related Products
-
Radio Frequency Coaxial Connector MCX Female Head Bending Four Corner Seat Manufacturers Direct (MCX-KWE)NegotiableMOQ: 1 Piece -
RF Coaxial MMCX Male Connector, PCB ConnectorNegotiableMOQ: 1 Piece
-
RF Coaxial 135 Degree SMA Female Adaptor, SMA Female to SMA Male AdaptorNegotiableMOQ: 1 Piece
-
RF Straight Coaxial SMB Male Connector, PCB Connector,gold PlatingNegotiableMOQ: 1 Piece
-
SMC Coaxial ConnectorsNegotiableMOQ: 1 Piece
Auto Fakra Antanna Adapter Cable
FAKRA Connectors and Cable Assemblies support applications that require a high-performing, reliable, and cost-effective RF connector. FAKRA connectors are standard SMB Connectors embedded within a special inter-locking plastic housing that uses multiple color-codes for easy identification and mating, and are designed to perform up to 4GHz at 50 Ω.
MAJOR CHARACTERISTICS
characteristic impedance: 50Ω
Temperature range: -45℃～+85℃
(The lower end of the wiring cable shall prevail)
Design structure and technical parameters:
RF coaxial connector: FAKRA SMB connector
Material:
Inner conductor: Brass,Gold-plated
Insulating medium: PTFE
Outer conductor: Brass, Nickel-plated
Electrical and mechanical properties: characteristic impedance: 50Ω
Frequency range: 0-4GHz
Medium Pressure: 1000V (60s)
Contact Resistance:
Inner conductor≤6mΩ Outer Contact≤1mΩ Insulation Resistance: 1000MΩ V.S.W.R≤1.3 (DC-4GHz)
Insertion loss:≤-15dB(0-4GHz)
Connectors mechanical life: ≥500 cycles
(frequency 12 cycles/MIN)
RF coaxial cable: RG174
Material: Inner conductor: Bare copper (7/φ0.16±0.003mm)
Dielectric: PE(φ1.52±0.05 mm)
Outer conductor:
Bare copper braided wire(80*φ0.10 mm)
Jacket: PVC(φ2.8±0.10 mm)
Physical electrical performance
Min Bent radius: 30mm
Max voltage: 1500 VMS
Temperature scope: -20℃～+80℃
Component overall specification requirements
Appearance:
Connector
Connector surface coating is uniform, no copper exposure, scratch (slight scratch is allowed but the metal under the coating shall not be exposed), oxidation, fracture, insulation deformation and other phenomena.
Cable
The cable is flat, smooth and without damage. No serious scratch is allowed.
Cable assemblies
The surface of the cable assembly shall be clean, free from dirt and bruises; Welding should be flat, no cracking, copper exposure and other phenomena; Reliable welding.
Send Inquiry to This Supplier
You May Also Like
-
SMA Male Crimp Solder Connector for RG58 LMR-195 RG142 CableNegotiableMOQ: 1 Piece
-
RF Coaxial SMB Female Jack Crimp Right Angle Connector for BT3002 CableNegotiableMOQ: 1 Piece
-
Favourable Price SMC Cable Coaxial ConnectorNegotiableMOQ: 1 Piece
-
RF Coaxial Connector SSMB Coaxial Solder 50 Ohm for RG174 RG316 CableNegotiableMOQ: 1 Piece
-
CCTV Accessories Coaxial Cable BNC ConnectorNegotiableMOQ: 1 Piece
-
SMC Coaxial ConnectorsNegotiableMOQ: 1 Piece
-
RF Straight Coaxial SMB Male Connector, PCB Connector,gold PlatingNegotiableMOQ: 1 Piece
-
RF Coaxial 135 Degree SMA Female Adaptor, SMA Female to SMA Male AdaptorNegotiableMOQ: 1 Piece
-
RF Coaxial MMCX Male Connector, PCB ConnectorNegotiableMOQ: 1 Piece
-
Radio Frequency Coaxial Connector MCX Female Head Bending Four Corner Seat Manufacturers Direct (MCX-KWE)NegotiableMOQ: 1 Piece
