Contact Platform Support
Help CenterHexagon Socket Flange Vision Mirror, Industrial Supplies
Related Products
Hexagonal flange visual mirror is also called equipment visual mirror, there are flat flange visual mirror, flat band neck visual mirror, flat band light visual mirror, etc. Specification DN50-200, can also be customized non-standard diameter size, material with stainless steel, carbon steel, lining, etc. The maximum service pressure is 25KGF/ cm2, allowing the temperature of the medium to vary with the use of glass, between 0 and 600 degrees. It is suitable for peering device of pharmaceutical, dairy, petroleum, beer, beverage, chemical, water conservancy, electric power and other industrial equipment to observe the operation of materials inside the equipment.
Main use of flange lens: the lens is used in petroleum, chemical industry, chemical fiber, medicine, food and other industrial production equipment can observe the flow reaction of liquid, gas, steam and other media at any time, is to ensure the normal production of indispensable accessories.
Main technical parameters of hexagon flange lens
1. Shell material: carbon steel and stainless steel
2. Make sure that the lens base is smooth and smooth, and the gasket between the lens and the lens base is installed smoothly. The gasket is not damaged and does not stick grease. Make sure the mirror holder and cover are properly installed before fastening the screw, then slowly tighten the screw.
3. Make sure that the gasket is well installed before working on the hinged or threaded view mirror device. Retighten the bolt if necessary. Make sure that the gasket between the eye hole and the eye hole is properly installed and that the connecting flange is not damaged, and adjust the connecting screw. Make sure not only that the elements connected to the lens are well sealed, but also that the sealing between the lens and the welded flange is well sealed, and that the pressure in the container does not exceed the rated pressure.
4. There should be no additional pressure on the mirror after installation, otherwise it will cause uneven force on the mirror and damage to the glass of the mirror.
5. Borosilicate glass: 0.6~ 1.0mpa.
6. Quartz glass 0.6-2.5mpa
7. Sealing ring material: teflon, oil-resistant asbestos, nitrile butadiene rubber, etc.
8. Standard of flange vision mirror: JB, HGJ, JB, DIN, etc. (Specified by the user, please indicate the pressure level)
Send Inquiry to This Supplier
You May Also Like
-
ASTM F52 Flanged Stub Branch TableNegotiableMOQ: 5 Pieces -
DN1000 Large Anchorage FlangeNegotiableMOQ: 2 Pieces
-
Q345R Pressure Vessel FlangeNegotiableMOQ: 5 Pieces
-
S30408 Mirror Flange ManufacturerNegotiableMOQ: 5 Pieces
-
A105 Figure Eight BlindNegotiableMOQ: 3 Pieces
-
12Cr1Mov Pressing Blue Cover, Pressing Blue SleeveNegotiableMOQ: 5 Pieces
-
A350LF3 Flat Welded FlangeNegotiableMOQ: 4 Pieces
-
ASTM F52 Flanged Stub Branch TableNegotiableMOQ: 4 Pieces
-
316L Stainless Steel Reduced Diameter FlangeNegotiableMOQ: 4 Pieces
-
16MN Tri-pole Vessel Flanged Tube PlateNegotiableMOQ: 2 Pieces
