BMC, SMC, GRP, GFK Building & Decoration Materials

Aobang composite Building Decoration materialis divided into: BMC building decoration material, SMC building decoration material, GRP building decoration material, GFK building decoration material.

Building decoration materials may have heard of commonly used bmc materials such as sandstone and cement. BMC, SMC, GRP, and GFK composite materials have been heard by few people. It is a new type of material. What are the advantages?

1. Short molding cycle, can be molded or injected, suitable for mass production.

2. A large amount of filler can be added to meet the requirements of flame retardancy and dimensional stability, and the cost is low.

3. Complex products can be integrally formed, and inserts, holes, tables, ribs, grooves, etc. can be molded at the same time.

4. Compared with ordinary thermoplastics, the heat resistance, insulation and modulus of elasticity of the products are higher.

5. The skills of workers are not high, and it is easy to automate and save labor.

6. The size of the product is accurate.

7. The working environment is good.

It can be known that it is resistant to water and oil and excellent corrosion resistance, and its heat resistance and good electrical properties are its advantages, making it stand out in the highly competitive material market. In addition, it can be further found that the composite material has higher requirements for the post-use environment than other materials.

We can provide GRP building products for you.

SMC and BMC composite require heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods.

Vacuum assisted systems for SMC and BMC molding: Products with Class A surfaces are usually vacuum-assisted, and the internal cavity and vacuum insulation of the mold are very important. The mold must have a sensor and a vacuum system to measure the mold temperature and pressure vacuum. Production SMC and BMC molds must guarantee high quality, long life and economy. Aobang Technology Co., Ltd.'s years of experience in the production of SMC and BMC molds and proficiency in machine, mold, material and process can ensure the maximum benefit of customers.