154 Polyisobutylene disuccinimide (high nitrogen, no chlorine)

Chemical name: Polyisobutylene dibutanediimide Category: ash - free dispersant

Product introduction

The ash - free dispersing agent is prepared by thermal adduction with high activity polyisobutylene (Mn=1000) as raw material.with

It has good cleanness and dispersity, and can restrain the formation of carbon deposition and paint film on engine piston.The product does not contain chlorine.Used to adjust

Medium and high - grade diesel engine oil, high - grade gasoline oil, low - speed crosshead engine Marine cylinder oil, especially modulation

It is suitable for the modulation of environmentally friendly internal combustion engine oil

Reference dosage: 2.0-4.0 (quality score) / %

Product features

● Very clean and dispersive ● No chlorine

Physicochemical properties

Test method for item quality index

Density (20℃), kg/m 890-935 GB/T1884

Kinematic viscosity (100℃), mm /s 120-220 GB/T265

Flash point (opening cup), ℃ ≥180 GB/T3536

Nitrogen content, % (m/m) 1.1-1.3 SH/T0224

Moisture content, % (m/m) ≤ 0.1GB /T260

Chroma (dilution) ≤5 GB/T6540

Total base value, mg KOH/g 15-30 SH/T0251

Product packaging

200l standard iron drum, product net weight 170Kg/ drum;In bulk.

Product storage, transportation and safety

Refer to SH/T0164 for storage, transportation, loading and unloading and oil blending of this product.This product is not flammable, does not explode, does not rot

The corrosion.The maximum storage temperature should not exceed 75℃;For long-term storage, the maximum temperature should not exceed 45℃.About product safety, yes

For user health and environmental considerations, please refer to the relevant chemical safety data Sheet.