Micro 1x1 Mechanical Optical Switches 850nm or 1260~1650nm Configurable OADM
Micro 1x1 Mechanical Optical Switches 850nm or 1260~1650nm configurable OADM.
Features:
♦ Low Insertion loss
♦ Wide Wavelength Range
♦ Low Crosstalk
♦ High Stability, High Reliability
♦ Epoxy-free on Optical Path
♦ Latching and Non-latching
Applications:
♦ Channel Blocking
♦ Configurable Add/Drop
♦ System Monitoring
♦ Instrumentation
Gezhi photonics' 1x1 Mechanical Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber.
1x1 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.
Specification:
| Parameters | GZ-FSW-1×1 | ||
| Wavelength Range | nm | 850±40/1300±40 | 1260~1650 |
| Operating avelength | nm | 850/1300 | 1310/1490/1550/1625/1650 |
| Insertion Loss | dB | Typ:0.5 Max:0.8 | Typ:0.4 Max:0.6 |
| Return Loss | dB | MM≥30 SM≥50 | |
| Crosstalk | dB | MM≥35 SM≥55 | |
| PDL | dB | ≤0.05 | |
| WDL | dB | ≤0.25 | |
| TDL | dB | ≤0.25 | |
| Repeatability | dB | ≤±0.02 | |
| Power Supply | v | 3.0 or 5.0 | |
| Lifetime | times | ≥107 | |
| Switch Time | ms | ≤8 | |
| Transmission Power | mW | ≤500 | |
| Operating Temperature | ℃ | -20~+70 | |
| Storage Temperature | ℃ | -40~+85 | |
| Weight | g | 16 | |
| Dimension | mm | (L)27.0×(W)12.0×(H)8.2 customization is available. | |
Pins:
| Type | State | Optical Route | Electric Drive | Status Sensor | ||||||
| 1×1 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | ||
| Latching | A | Light close | -- | -- | GND | V+ | Close | Open | Open | Close |
| B | P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open | |
| Non-latching | A | Light close | -- | -- | -- | -- | Close | Open | Open | Close |
| B | P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open | |
Ordering Information:
| Mode | Wavelength | Voltage Type | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| S=SM M=MM |
85=850nm 13=1310nm 15=1550nm 13/15=1310/1550nm X=Others |
3=3V 5=5V |
L=Latching N=Non- Latching |
5=50/125 6=62.5/125 9=9/125 X=Others |
25=250um 90=900um 20=2.0mm 30=3.0mm X=Others |
1=1m 2=1.5m X=Others |
0=None 1=FC/PC 2=FC/APC 3=SC/PC 4=SC/APC 5=ST/PC 6=ST/APC 7=LC/PC 8=LC/APC |
Optical Route:
| Status A | Status B |
|
|
GEZHI Photonics offers most affordable high performance Opto-Mechanical Fiber Optic Switches. Our Mechanical Fiber Optic Switches are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition. Currently configurations includes 1x1, 1x2, 1x4, 1x8, 2x2, 2x2A, 2x2B, and 2x2BA as well as Dual 2x2 and Dual 2x2 Bypass configurations for single mode or multimode fibers. For more information about Opto-mechanical fiber optic switches, please e-email shirley@gezhiphotonics.com
Send Inquiry to This Supplier
You May Also Like
-
Mini 1x4 OptoMechanical Fiber Optical SwitchNegotiableMOQ: 1 Piece
-
2x2 Mechanical Automatic Optical Switch Module Passive ComponentNegotiableMOQ: 1 Piece
-
D2x2B Multimode Optical Switches 850nm Dual 2x2 Bypass , Fiber Optic SwitchesNegotiableMOQ: 1 Piece
-
2x2B Opto - Mechanical Fiber Optical Switches Optical Bypass SwitchNegotiableMOQ: 1 Piece
-
Dual 2x2 Multi Mode Mechanical 4x4 Fiberoptic Switch ( Latching Or Non Latching )NegotiableMOQ: 1 Piece
-
Micro 1x1 Mechanical Fibre Optical Switch Module SM 3V Latching ModuleNegotiableMOQ: 1 Box
-
LC/PC Connector 1x2 Mechanical Optical Switch Low Insertion LossNegotiableMOQ: 1 Piece
-
2:1 Optical Protection SwitchNegotiableMOQ: 1 Piece
-
3 Port FWDM Filter CWDM Mux Demux Pass 1490nm Reflect 1310 / 1550nmNegotiableMOQ: 1 Piece
-
Planar DWDM Components 40 Channel 100G Athermal AWGNegotiableMOQ: 1 Piece


