Contact Platform Support
Help CenterDouble Wire Straightening Machine Manufacturer
Related Products
-
DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TBX)US$ 1 - 100MOQ: 1 Set -
DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TX)US$ 1 - 100MOQ: 1 Set
-
HIGH SPEED STRAIGHTENING & CUTTING MACHINEUS$ 1 - 100MOQ: 1 Set
-
LOW SPEED STRAIGHTENING & CUTTING MACHINE (KZ6-12X)US$ 1 - 100MOQ: 1 Set
-
REBAR SHEAR-LINEUS$ 1 - 100MOQ: 1 Set
DOUBLE WIRE STRAIGHTENING & CUTTING MACHINE (KZ12TBX),precision machining Stirrup bender,High Speed Straightening Machine,Double Wire Straightening Machine Manufacturer
precision machining Stirrup bender
High Speed Straightening Machine
Double Wire Straightening Machine Manufacturer
HIGH SPEED STRAIGHTENING & CUTTING MACHINE use the high speed rotating spinner to make straightening. This machine make straight bar from coil in high efficiency.
Model |
KZ12TBX |
Raw material |
Bar in coil, wire rod (low carbon) |
Production capacity |
φ5 – φ13 (mm) single wire |
Maximum feeding speed |
120 (m/min) |
Cutting length |
50- 12,000 (mm) |
Length measuring |
Automatic |
Linearity of straightening |
≤ 2 (mm/m) |
Tolerance of cut-to-length |
≤ ±3 (mm) |
Power consumption |
6 Kw/h |
Machine weight |
4.8tons |
Oversize |
22*3.4*2m |
Production capacity |
Double : 10mm-58ton/8h, 6mm-18T/8h,8mm-37T/8h |
STRAIGHTENING & CUTTING MACHINE PRINCIPLE
CENTRAL MACHINE
2.DOUBLE WIRE FEEDING
3.WIRE FEEDING AND STRAIGHTENING UNIT
Suitable for single wire and double wire.
Pneumatic clamp and feeding system
Two sets of straightening units to ensure the straightness , one is horizontal , the other is vertical
4.CUTTING UNIT
Electromagnetic braking cutting motor.
Plug type fixed blade and movable blade, easy to replace and save cost.
5.COLLECTING BENCH
12m long collecting bench
With 2sets of transitory collecting fingers to hold different specification straight bar.
When tie up the previous bundle, the machine is fabricating the following bundle, no need to stop the machine to wait.
3.WIRE FEEDING AND STRAIGHTENING UNIT
Suitable for single wire and double wire.
Pneumatic clamp and feeding system
Two sets of straightening units to ensure the straightness , one is horizontal , the other is vertical
Send Inquiry to This Supplier
You May Also Like
-
VERTICAL DOUBLE BENDERUS$ 1 - 100MOQ: 1 Set
-
HORIZONTAL BENDING CENTERUS$ 1 - 100MOQ: 1 Set
-
INTEGRATED REBAR CUTTING & BENDING MACHINEUS$ 1 - 100MOQ: 1 Set
-
INTEGRATED REBAR SHEAR & BENDING LINEUS$ 1 - 100MOQ: 1 Set
-
REBAR SAWING & THREADING MACHINEUS$ 1 - 100MOQ: 1 Set
-
Precision Machining Stirrup BenderUS$ 1 - 100MOQ: 1 Set
-
High Speed Straightening Cutting MachineUS$ 1 - 100MOQ: 1 Set
-
Double Wire Straightening Cutting Machine ManufacturerUS$ 1 - 100MOQ: 1 Set
-
Double Wire Straightening Cutting Machine FactoryUS$ 1 - 100MOQ: 1 Set
-
Rebar Shear-line FactoryUS$ 1 - 100MOQ: 1 Set
