Contact Platform Support
Help CenterTEGX507 Cable and Pipe Route Locator
Related Products
-
TEJS-6000 Automatic Dielectric Loss Test KitUS$ 1999 - 3999MOQ: 1 Piece -
TEBB-600A Automatic Transformer Turn Ratio TesterUS$ 999 - 2599MOQ: 1 Piece
-
TEBZ-10A Transformer DC Resistance TesterUS$ 999 - 3999MOQ: 1 Piece
-
TEPD-6104 Hand Held Partial Discharge DetectorUS$ 2999 - 5999MOQ: 1 Piece
-
TE3000A Earth Resistance and Soil Resistivity TesterUS$ 599 - 999MOQ: 1 Piece
The TEGX507 cable fault locator is designed based on the application of the principle of communication based on electromagnetic induction. It is user-friendly design. The signal strength of the large-screen LCD is displayed. The grid, arrow and sound prompts make it easy for the operator to judge the underground position and the fault point of the cable. One person can do all the work.
Main Features:
1. Pinpoint buried cable fault; seeking the 50Hzcable path measurement;
2. with rechargeable batteries, no need electricity, easy to field operations;
3. Continuous automatic impedance matching, multiple detection modes, for a variety of complex pipeline detection;
4. Multi-antenna, multi-channel, direct display cable depth;
5. Current measurement for parallel pipelines; built-ohm meter to measure the loop resistance.
Transmitter technical Specifications:
Work Frequency: Low frequency（815Hz）Middle frequency（8kHz）、High frequency（33 kHz）、Radio frequency（83 kHz）、50Hz
Antenna mode: Wave Valley Method (Zero Value Mode), Peak Method (Peak Mode), and Step Voltage Method (A-frame)
Work mode: Direct connection method, inductive method, coupling method
Audio indication: according to signal intensity to adjust audio.
Current indication: Show the value of actual current of the testing cable(mA)
Battery Type: 6 two number Batteries (Alkaline)Signal strength: bar graphs, numbers range from 0 to 999
Dynamic range: 100dB
Testing depth: Max more than 5m
Testing distance: The cable with good insulation can reach up to 15km in direct connection method
Depth measurement: press the depth key three digits display, the maximum measurable depth is up to 10 meters
Accuracy*: Low frequency: ± (1-5)% ≤ 2.5 m RF: ± (5-12)% ≤ 2.5 m
Depending on the site environment, the shape of the non-copper core, the number of adjacent lines, and the return current of the soil
Receiver technical specifications:
Operating frequency: audio, RF, 50Hz passive AC frequency
Antenna mode: trough method, peak method, step voltage method
Matching load: 5 ohms - 3000 ohms
Impedance display: five digits
Overheating and overcurrent: automatic protection
Power output: low, mid, high
Battery type: rechargeable battery
Battery life: 4 hours to 8 hours of continuous operation depending on the frequency of use, output power intermittent operation 6 hours to 10 hours depending on the frequency of use, output power
Send Inquiry to This Supplier
You May Also Like
-
TE513 Digital Insulation Resistance Tester (5KV, 10KV)US$ 599 - 1599MOQ: 1 Piece
-
TE7001 Transformer Insulation Oil Break Down Test Kit 80KV/100KVUS$ 999 - 3999MOQ: 1 Piece
-
TEBS-III Pensky-Martens Closed Cup Flash Point TesterUS$ 999 - 1999MOQ: 1 Piece
-
TE200 Karl Fischer Coulomb Titrator for Insulation Oil Water Moisture TestUS$ 999 - 3299MOQ: 1 Piece
-
Cable Fault Locator SystemNegotiableMOQ: 1 Set
-
3M Cable Fault Locator 2273EUS$ 1,000 - 7,000MOQ: 1 Set
-
Wires And Cable Use Underground Cable Fault Locate Tester Rg6US$ 15 - 16MOQ: 100 Pieces
-
OFW Brand 10mW Optical Fiber Cable Fault LocatorUS$ 33 - 40MOQ: 10 Pieces
-
Cable Fault LocatorNegotiableMOQ: 1 Piece
-
China Hz4000 Cable Fault Locator/Cable Fault Locating SystemUS$ 3,000 - 5,057MOQ: 1 Set
