Contact Platform Support
Help CenterTEJS-6000 Automatic Dielectric Loss Test Kit
Related Products
-
TEBB-600A Automatic Transformer Turn Ratio TesterUS$ 999 - 2599MOQ: 1 Piece -
TEBZ-10A Transformer DC Resistance TesterUS$ 999 - 3999MOQ: 1 Piece
-
TEPD-6104 Hand Held Partial Discharge DetectorUS$ 2999 - 5999MOQ: 1 Piece
-
TE3000A Earth Resistance and Soil Resistivity TesterUS$ 599 - 999MOQ: 1 Piece
-
TEGX507 Cable and Pipe Route LocatorUS$ 1999 - 3299MOQ: 1 Piece
Automatic Dielectric Loss Tester
Model: TEJS-6000
Product Description: Dielectric loss measurement is a basic method in insulation test, degradation and partial defect of insulation of electrical equipment. It adopts high-power switching power supply, which outputs 45Hz and 55Hz pure sine wave and automatically increase the voltage to a maximum value 10 KV. It can filter 50Hz interference automatically, and it is applicable to the site test of substation and other places with large electromagnetic interference.
Technical data:
Accuracy: Cx:±（reading×1%+1pF）
tgδ: ±（reading×1%+0.00040）
Anti-interference: Variable frequency anti-interference, the above accuracy can be reached under 200% interference.
Capacitance range: Internal HV: 3pF～60000pF/10kV 60pF～1μF/0.5kV
External HV: 3pF～1.5μF/10kV 60pF～30μF/0.5kV
Resolution: Maximum 0.001pF, 4 valid figures.
tgδ range: unlimited, 0.001% resolution, automatic identification for capacitance, inductance and resistance of three tested articles.
Test current range: 10μA～1A
Internal HV: Set voltage range: 0.5～10kV
Maximum output current: 200mA
Buck-bust method: continuous stepless regulation
Test frequency: 45, 50, 55 single frequency
45/55Hz automatic dual variable frequency
Frequency accuracy: ±0.01Hz
External HV: In case of UST, maximum test current is 1A, and power frequency or variable frequency is 40-70Hz
In case of GST, maximum test current is 10kV/1A, and power frequency or variable frequency is 40-70Hz
CVT self-exciting low voltage output: Output voltage 3～50V, output current 3～30A
Measuring duration: About 40s, depending on measuring method
Input power supply: 180V～270VAC, 50Hz/60Hz±1%, supplied by alternating current or generator
Computer interface: Standard RS232 interface
Printer: WH-A7 mini-type thermal printer
Send Inquiry to This Supplier
You May Also Like
-
TE513 Digital Insulation Resistance Tester (5KV, 10KV)US$ 599 - 1599MOQ: 1 Piece
-
TE7001 Transformer Insulation Oil Break Down Test Kit 80KV/100KVUS$ 999 - 3999MOQ: 1 Piece
-
TEBS-III Pensky-Martens Closed Cup Flash Point TesterUS$ 999 - 1999MOQ: 1 Piece
-
TE200 Karl Fischer Coulomb Titrator for Insulation Oil Water Moisture TestUS$ 999 - 3299MOQ: 1 Piece
-
Signal Transformer TesterNegotiableMOQ: 1 Set
-
FULLY AUTOMATIC Transformer Tester Series for Transformer Maintaining and RepairingUS$ 1,000 - 5,000MOQ: 1 Set
-
AT3600 Transformer Tester, Transformer Tester,AT3600NegotiableMOQ: 1 Set
-
TKVA Transformer Comprehensive TesterNegotiableMOQ: 1 Piece
-
Transformer Capacity & Loss TesterUS$ 1000 - 10000MOQ: 1 Set
-
Inverters&converters Transformer TesterUS$ 1,000 - 3,000MOQ: 1 Piece
