ARCHON D35VPII & W41VPII Diving Video & Spot Light Scuba Diving Torch LED Flashlight

ARCHON W41VPII Underwater Diving Video light Dive Video Torch LED Flashlight  4000 lumen Diving Spot Torch

Description: Multifunction diving video light and phtography light

Operation Instruction
1. Successively push the switch 1 ON - OFF to cycle through White (video light) high,low,strobe,and off. (After each push the switch will slide back to the original position automatically)
2. Successivly push the switch 2 ON - OFF to cycle through White (spot light),red,UV and off.
3. Both switches can be turned on or off simultaneously or seperately.(If the switch gets stuck,please add the washing liquid in the switch slot,push switch back and forth till it moves smoothly.Please rinse it with the clearn water afterwards.
SAFETY FEATURES:
Battery over-discharging protection
Polarity reversing protection.
Gas release valve

SCUBA DIVING APPLICATION

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

CAUTION

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.