Contact Platform Support
Help CenterMAINTENANCE SYSTEM TESTER
Related Products
Battery Load Test
This test evaluates a battery's ability to crank an engine. The tester draws current from the battery while measuring its voltage level. The voltage level of a good battery will remains relatively steady under load, but a defective battery will show a rapid loss in voltage.
Charging Voltage Test (for 12V system only)
This test enables the user to measure the output voltage of the alternator/regulator and check for undercharging or overcharging, which leads to poor battery performance and short life.
Starter Motor Test (for 12V system only)
This test identifies excessive starter current draw, which makes starting difficult and shortens battery life.
Automotive batter testing/Charging system/launching motor
This tester is designed for automotive battery load voltage test, charging voltage test and starter motor test. It is very useful and can be used in vehicle's fault diagnosis and service.
SPECIFICATION
Display: 4-digit nixie tube display
Measuring Range: DC 4.5V~18.5V
Size: 175×75×32mm
Weight: about 281g
Send Inquiry to This Supplier
You May Also Like
-
KEY FOB TESTERUS$ 10 - 50MOQ: 100 Sets -
DIGITAL THERMO-ANEMOMETERUS$ 10 - 50MOQ: 100 Sets
-
INJECTOR TESTERUS$ 10 - 50MOQ: 100 Sets
-
BRAKE FLUID TESTERUS$ 10 - 50MOQ: 100 Sets
-
Engine Oil Quality Test ToolUS$ 10 - 50MOQ: 0 Set
-
Auto Engine RPM Test ToolUS$ 10 - 50MOQ: 100 Pieces
-
Antifreeze RefractometerUS$ 10 - 50MOQ: 100 Sets
-
Digital RefractometerUS$ 10 - 50MOQ: 100 Sets
-
ULTRASONIC LEAK DETECTORUS$ 10 - 50MOQ: 100 Sets
-
Lambda Tester and SimulatorUS$ 10 - 50MOQ: 100 Sets
