New design! PET plastic compound machine/PET granule twin screw extruder/PET pellet making machine

New design PP PET PVC HDPE LDPE plastic granules twin screw extruder/plastic pellet making machine

 Braces particle cutting machine is mainly used in PET, PVC and other high viscosity materials.
The machine can reduce less loss of the viscosity of the raw material. Compared to water-ring cutting, it is not easy to break the article or adhesion.The granules that the Braces particle cutting machine produce are much more uniform and beautiful.

Product Description

1.Feeding Machine 

This machine can be used with all kinds of extruders. It can carry plastic are cleaned into the hopper

of Extrude. automatic.It can save your labour,ande realize the effect of safety and reliability. 

2.Extruder 

This machine is used to extrude plastic cleaned by high temperature.The extrusion line can be consisted by such accessory machine: main motor, the gear box, the distribution box, the barrel and screw, the dies, vacuum calibration tank. Main Motor is mainly to supply the power. The Gear box transfers the motor to power.The distribution box enlarges the strength of the power and realizes uniformity.Double screws can make low viscosity index consume of raw material and improve production.It also has a Cooling tank making the heat of screw be appropriate. 

3.Mould 

We use plug board type to change nets and keep machine working.The mould is made by 40Cr nitridation .The pressure sensor prompts to change the nets.There also can install a hydraulic equipment to change the nets more quickly. 

4.Water Channel 

The water channel is 4 meters long.Make out article of cooling 

5.Winds drying machine 

Through the double channels strong wind dryer,force drying and cooling article material reach the fast speed effect of shaping up.

6.Pelletizer machine 

It adopts grain design, accracy is high and can guarantee the rotatory precision and stationery of power, movements of cylinder are controlled by the solenoid valve, the automatic degree is highand  the noise is low.

Biodegradable starch plastic raw material granule compounding making machine

PVC LSHF  compound making machine with Two Stages extruder

Typical Features

First stage is GL series co-rotating twin-screw mixer,using twin-screw high speed, high shear and strong hybrid advantage,makes material fully plasticized and mixed. 

 Second stage is SJ series single screw extruder. The characteristics of low speed and deep groove provide low shear processing environment, and coupled with barrel cooling, prevent the plasticised material  from overheating decomposition phenomenon during high-pressure extrusion.

Applies to : 

All kinds of heat-sensitive materials processing, such as PVC,XLPE, LSHF  low smoke zero halogen flame retardant cable, shielding material etc.

Application for two stages extruders pelletizing machine (cascade extruders)

1. Plastic recycling: PP plastic bags recycling, PE film recycling

2. Cable material:PVC cable, PVC transparent bottle material, LDPE/HDPE/LLDPE crosslinked cable material

3. Anti-flame(flame retardant) masterbatch: LSHF

    PP/ABS/PS/EVA/PA+Mg(OH)2(magnesium hydroxide)/Al2(OH)3 (aluminum hydroxide)

1. Q: How about Gongle Rubber &Plastic  Machinery Co., Ltd. ?

     A:  Jiangsu Gongle Rubber&Plastic Machinery Co., Ltd. is a factory and also a company. We are specialized in this field for more than 30 years. At the same time we manufacture screw elements and barrel in our own factory.

2. Q: How long is the guarantee? 

    A: 12 months guarantee will be effective from the date of commissioning or 15 months from delivery.

3. Q: Where is your factory located? How can I visit there? 

    A: Our factory is located in  Suzhou, Jiangsu Province, China,which is quite near Shanghai Airport

    All our clients, from domestic or abroad, are warmly welcome to visit us! 

4. How about after-service?

          We do provide life-long technical consultancy and spare parts. Cost-free direction installation. Normally like Turkey, Thailand, USA etc, we go there for exhibition, at the same time we will visit customers’ factory for machine troubleshooting and maintenance

 Extruder  Description