Iron Cast Pipe Fitting Elbow For Water Line Hot Dipped Galvanizing

Our company perennial reserves a large number of GOST17375, ANSI B16.9, EN 10253-1 and other international standards, the material S235, A234WPB, C20, 304 / 304L, 316 / 316L, 09G2S, 15XSND, Galvanized Steel Pipe Fitting Elbow 12 Inch 17Q1S.A402 WPL3 / WPL 6, A860 WPHY 42/46/52, such as carbon steel, alloy steel, stainless steel 90 degrees, 45 degrees, 180 degrees elbow, tees, reducers and other Pipe Fittings products spot. Welcome new and old customers negotiate procurement, Short Radius 45 Seamless Pitting Elbow LR 1.5D ASME carbon steel 90 elbow we will be high-quality products and friendly service to become your one-stop supplier of pipeline product Carbon Steel 90 5D Pipe Bend Elbow tt Welded Carbon Steel Elbow

Our company perennial reserves a large number of GOST17375, ANSI B16.9, EN 10253-1 and other international standards, the material S235, A234WPB, C20, 304 / 304L, 316 / 316L, 09G2S, 15XSND, Galvanized Steel Pipe Fitting Elbow 12 Inch 17Q1S.A402 WPL3 / WPL 6, A860 WPHY 42/46/52, such as carbon steel, alloy steel, stainless steel 90 degrees, 45 degrees, 180 degrees elbow, tees, reducers and other Pipe Fittings products spot. Welcome new and old customers negotiate procurement, Short Radius 45 Seamless Pitting Elbow LR 1.5D ASME carbon steel 90 elbow we will be high-quality products and friendly service to become your one-stop supplier of pipeline product Carbon Steel 90 5D Pipe Bend Elbow tt Welded Carbon Steel Elbow

Buttweld Pipe Tee Production Range – Equal Tee, Unequal Tee (Reducing Tee) 

Outside Diameter: Seamless Pipe Tee ( 1/2″~24″), ERW / Welded / Fabricated Pipe Tee (1/2″~48″)

Types: Equal Tees, Reducing Tees

Wall Thickness: 3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering

Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel

Manufacturing Standards – Pipe Tee

ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASME B16.9 – Factory-Made Wrought Fittings Buttwelding

ASME B16.25 – Buttwelding Ends ASME B16.28 – `Wrought Steel Short Radius Elbows and Buttwelding Returns`

MSS SP-43 – `Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

P265GH/A234WPB EN10253 DISHED ENDS Naote that the process of manufacturing process: the right approach is: cutting (scribing) - small board fight into the board - forming - nondestructive testing if the test is not done before molding is wrong, can not guarantee after molding products the quality of. In other words, nondestructive testing refers to the final non-destructive testing..
Standrad
1 )Standard: ASTM, ASME , DIN ,JIS,API ,GB ,ISO
2) Certifications : ABS ,CC ,TUV,CC ,GL ,BV ,ISO14001 ,ISO9001 ,OHSMS
Material :
Carbon Steel: ASTM A-234 (WPB,WPC)
EN 10216-2 (P235GH,P265GH)
EN10222-2(P245GH,P280GH)
NF A49-213 (TU42C,TU48C)
Low Alloy Steel : ASTM A-420(WPL6)

ASTM A-234(WP11,WP22,WP5)

ASTM A-860(A860-WPHY52)

Stainless Steel: ASTMA403M (WP304,WP304L,WP304H,WP316,WP316L,WP321,WP321H,WP347,WP347H) EN10216-5(X2CrNiN18-10(1.4311),X5CrNi18-10(1.4301),X5CrNiMo17-12-2(1.4401),X2CrNiMo17-12-2(1.4404)