Contact Platform Support
Help CenterTRIPLEX MUD PUMP CERAMIC ZIRCONIA LINER
Related Products
-
Drilling Mud Pump Module-fluid End Assembly for 12P160/14T2200- SW StyleUS$ 1500 - 2000MOQ: 1 Set -
TPK2200 TPK1600 WIRTH MUD PUMP SPARE PARTS LINER VALVE ASSY PISTONUS$ 20 - 290MOQ: 3 Pieces
-
14T2200 12T1600 9T1000 MUD PUMP DRILLMEC TRIPLEX PUMP PARTS LINER VALVE ASSY PISTONUS$ 20 - 300MOQ: 3 Pieces
-
DRILLMEC 14T2200 12T1600 MUD PUMP PISTON HUB VALVE ASSEMBLY LINERUS$ 200 - 230MOQ: 1 Piece
-
Mud Pump Valve Seat BOMCO NOV DRILLMEC 9T1000 WIRTH 12P160 F1600 APLEX SC170L SC45L MUD PUMPUS$ 28 - 70MOQ: 3 Pieces
Zirconia Liner
HNA's zirconia liner offers lifetime cost savings, significantly longer service, better performance and safer operation than those made of more commonly used alumina ceramic. HNA's zirconia liner is a proprietary Zirconium-based matrix that has significantly improved mechanical characteristics.
Zirconia has three important property advantages compared to alumina.
- Zirconia exhibits better impact strength.
- Zirconia is harder than alumina.
- Zirconia can be honed to finer surface finishes than alumina. Finished to 4 RMS, the zirconia liners provide a surface finish that's three to four times finer than alumina.
All three of these property advantages translate to lower ownership costs. The improved wear directly extends the service life of the sleeve, while the improved impact strength cuts down on the significant costs of replacing broken liners in the field. The surface finish improvements, meanwhile, have an indirect effect. The finer surface finish means less friction with the elastomer-and-metal pump pistons, which in trun extends piston life and reduces pump-cooling requirements.
- HP design with shoulder-on-hull design to prevent sleeve slippage
- Reduced liner and piston wear
- Increased impact characteristics
- Lower thermal load on the liner wash system
- Higher thermal ratings
- HP design with shoulder-on-hull to prevent sleeve slippage
- ID tolerances of +.010”/ -.000”
- Surface finish of 4 - 8 RMS
- Hardness is HV 0.3 kg/mm – 1100/1200 ( 92 - 94 Rc)
- Good performance on the high temperature application
- Liner sizes are available from 4½” to 7” for all popular mud pumps
Do contact us for further sales enquiries.
Send Inquiry to This Supplier
You May Also Like
-
Triplex Drilling Mud PumpsUS$ 50,000 - 150,000MOQ: 1 Set
-
HFBW250 Triplex Drilling Mud PumpUS$ 490 - 900MOQ: 1 Set
-
3NB500 TRIPLEX DRILLING MUD PUMPNegotiableMOQ: 1 Set
-
BW350 Single Acting Triplex Drilling Mud PumpUS$ 2,500 - 75,000MOQ: 1 Set
-
F-1600 Single Acting Triplex Drilling Mud PumpUS$ 125,806 - 138,709MOQ: 1 Set
-
Mud Pump Cylinder Assy Used for EMSCO F800/1000 Triplex Drilling Mud PumpNegotiableMOQ: 1 Piece
-
Horizontal Triplex Drilling Mud Pumps Reciprocation Diesel EngineNegotiableMOQ: 1
-
TRIPLEX MUD PUMP CERAMIC ZIRCONIA LINERUS$ 170 - 1400MOQ: 2 Pieces
-
Drilling Triplex Mud Pump 3NB 800NegotiableMOQ: 1 Set
-
RGF-1000 Oil Drilling Triplex Mud Pump Spare Parts Bimetallic Cylinder Liner/sleeveUS$ 100.00 - 100.00MOQ: 1 Piece
