Home > Products > alloy steel > AISI 4140 Steel Bar | 1.7225 | 42CrMo4 | SCM440 alloy steel
AISI 4140 Steel Bar | 1.7225 | 42CrMo4 | SCM440 alloy steel
- 100000 Ton / Tons per Month
- shenzhen
- T/T L/C PayPal
- Nak80/10ni3mncual die steel
- HPM75 mould steel
- S7 Performance Cold Working Die Steel
- AISI 4140 Hot Rolled Alloy Round Bar
- The manufacturer of the anchor bolts for the iron tower provides U-shaped screw embedded parts, steel structure embedded prefabricated parts, and samples can be provided according to the drawings
- Production of Monel400 N04400 Monel K-500 N05500 Monel Alloy Bar Round Steel
Product Details
Brand Name: | otai steel | Place of Origin: | China | Model Number: | 4140 Steel |
Type: | Alloy Steel Bar | Application: | Tool Steel Bar | Technique: | Cold Drawn |
Standard: | AISI, ASTM, DIN, GB, JIS | Alloy Or Not: | Is Alloy | Special Use: | Free Cutting Steel |
Steel Grade: | H13 Tool Steel |
Product Description
AISI 4140 Steel Bar, Steel Plate, Flats Supplier, Stockist, and Exporter. AISI SAE 4140 alloy steel is a chromium molybdenum alloy steel specification widely used in general purpose high tensile steel for components, like axles, shafts, bolts, gears, and other applications. Similar to alloy grade AISI 4130 chrome moly alloy steel but with slightly higher carbon content. The higher carbon content of AISI 4140 steel gives greater strength and heat treatment capabilities in comparison to AISI / ASTM 4130 alloy steels, however, it does have inferior weldability characteristics.
1. Supply Range for AISI alloy 4140 steel bar
4140 Steel Round Bar: diameter 8mm – 3000mm
4140 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
4140 Steel Grade Square: 20mm – 500mm
Surface Finish: Black, Rough Machined, Turned or as per given requirements.
2. Common 4140 Steel Specifications
Country | USA | German | British | Japan | China | Australia |
Standard | ASTM A29 | DIN 17200 | BS 970 | JIS G4105 | GB/T 3077 | AS 1444 |
Grades | 4140 | 1.7225/ 42crmo4 | 42CrMo4 | SCM440 | 42CrMo | 4140 |
3. 4140 Steel Bar Chemical Composition
Standard | Grade | C | Mn | P | S | Si | Ni | Cr | Mo |
ASTM A29 | 4140 | 0.38-0.43 | 0.75-1.00 | 0.035 | 0.040 | 0.15-0.35 | – | 0.8-1.10 | 0.15-0.25 |
EN 10250 | 42CrMo4/ 1.7224 | 0.38-0.45 | 0.6-0.9 | 0.035 | 0.035 | 0.4 | – | 0.9-1.2 | 0.15-0.30 |
JIS G4105 | SCM440 | 0.38-0.43 | 0.60-0.85 | 0.03 | 0.03 | 0.15-0.35 | – | 0.9-1.2 | 0.15-0.30 |
4. Mechanical Properties of AISI Alloy 4140 Steel Bar, Plates, Square
Properties | Metric | Imperial |
Tensile strength | 655 MPa | 95000 psi |
Yield strength | 415 MPa | 60200 psi |
Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
Elastic modulus | 190-210 GPa | 27557-30458 ksi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (in 50 mm) | 25.70% | 25.70% |
Hardness, Brinell | 197 | 197 |
Hardness, Knoop (converted from Brinell hardness) | 219 | 219 |
Hardness, Rockwell B (converted from Brinell hardness) | 92 | 92 |
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only) | 13 | 13 |
Hardness, Vickers (converted from Brinell hardness) | 207 | 207 |
Machinability (based on AISI 1212 as 100 machinabilities) | 65 | 65 |
5. Forging
Preheat the steel carefully, heat to 1150 of – 1200 oC maximum, hold until temperature is uniform throughout the section.
Do not forge below 850 oC. Following forging operation the workpiece should be cooled as slowly as possible.
6. AISI 4140 Steel Grade Heat Treatment
Annealing
Heat ASTM 4140 sheets of steel to 800 oC of – 850 oC, hold until temperature is uniform throughout the section and cool in furnace.Normalizing
Heat steel alloy 4140 to 870 oC – 900 oC, hold until temperature is uniform throughout the section, soak for 10 – 15 minutes and cool in still air.Tempering
Re-heat 4140-grade steel to 550 oC – 700 oC as required, hold until temperature is uniform throughout the section, soak for 1 hour per 25 mm of a section, and cool in still air.
7. Hardening of AISI Alloy Steel 4140
AISI alloy 4140 steel bar, plate, and square can be hardened by cold working, or heating and quenching.
SAE 4140 alloy steel is usually supplied ready heat treated to hardness in 18-22 HRC. If further heat treatment is required, then heat to 840 oC – 875 oC, hold until temperature is uniform throughout the section, soak for 10 – 15 minutes per 25 mm section, and quench in oil, water, or polymer as required.
8. Application of AISI alloy round 4140 steel bar
ASTM alloy 4140 steel bar, flat or plate material can be used for as wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades. Typical applications for 4140 tool steel uses include Components, Adapters, Arbors,strippers, holder blocks, mold bases, ejectors, back up and support tooling, fixtures, jigs, molds, cams, drill collars, Axle Shafts, Bolts, Crankshafts,stubs, couplings, reamer bodies, axles, shafting, piston rods, rams, hydraulic machinery shafts, gears, sprockets, gear racks, chain links, spindles, tool bodies, tool holders, tie rods, Connection Rods, Chuck Bodies, Collets, Conveyor Pins & Rolls, Ejector Pins, Forks, Gears, Guide Rods, Hydraulic Shafts & Parts, Lathe Spindles, Logging Parts, Milling Spindles, Motor Shafts, Nuts, Pinch Bars, Pinions, Pump Shafts, boring bars, tracks, slides, wear strips or parts, forming dies, brake dies, trim dies, bolsters, machinery parts and components, etc.
Contact us
Email: Jack@otaisteel.com
Tel: +86-769- 23190193
Fax: +86-769-88705839
Contact Us
- Dongguan Otai Special Steel Co Ltd
tool steel | mold steel | alloy steel | stainless steel |
carbon steel |
- 40Cr Steel Round Bar
- SAE1045 Steel Round Bar
- SAE4140 Steel Round Bar
- S7 High performance cold work die steel
- Heat treatment process of HPM75 non-magnetic steel round bar
- China produces HPM75 non-magnetic die steel
- A-2 tool steel
- Grinding Steel Rods for mining industry
- cold draw steel round bar
- chrome plated hyraulic piston bar
- Induction hardened Cr.Plated Rod
- Linear Shaft
- SUS630 ph stainless steel (Wires, Rods, Bars, Plates)
- AISI 8620 Steel Round Bar | SAE AISI 8620 Steel Round Bar Price Per Kg
- JIS SCr440 Steel Bar | Heat Treating JIS SCr440 Steel Bar Alloy
- AISI 4340 Steel Bars | AISI 4340 Steel Bars Manufacturing | ASTM AISI 4340 Steel Bars Stock
- 4340 steel supply | 4340 steel supply product | high strength 4340 steel supply sale
- AISI 4140 Steel Round Bar | ASTM SAE AISI 4140 Steel Round Bar Supplier
- 4140 steel manufacturing | 4140 steel manufacturing company | aisi 4140 steel manufacturing manufacturer
- ASTM AISI SS Bright Rod 316 304 201 2mm 3mm 6mm stainless steel round bar Metal
- Steel bars grade 8.8 AISI 4140 1020 1045 Cold Drawn structure mild carbon/alloy round bars
- 1050 8620 8640 Alloy Steel Carbon Steel Solid Round Bar for Construction
- China Customized Alloy Steel OD OD60 mm Length 1000m 416 304 Stainless Steel Round Bars
- Manufacturer round steel bar AISI 1020 1045 1055 1084 4140 C45 A36 Mild Steel Round Bar Steel Bar
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Round Bars
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-