Contact Platform Support
Help CenterTD-1206 T8 Glass Tube Glue Dispensing Machine(Basic Model)
Related Products
-
MG-1280 Full Automatic AB Glue Mixing & Dispensing MachineNegotiableMOQ: 1 Set -
MG-315 Semi-automatic AB Glue Mixing & Dispensing MachineNegotiableMOQ: 1 Set
-
TD-1510 T8 Glass Tube Glue Dispensing Machine(General Model)NegotiableMOQ: 1 Set
-
Wall Washer Automatic Lens Mounting MachineNegotiableMOQ: 1 Set
-
TC-30 Back-lit Panel Glue Dispensing MachineNegotiableMOQ: 1 Set
Principle Description
u Put six PCB strips downside on the fixture sticks. Six PCB strips on the fixture sticks are being glued while being inserted to the glass tube. The tubes press down for few seconds and stick with PCBs. The whole process is finished when the sticks are pulled out and tubes are transferred to the next work station.
Machine Features
u Specially designed for T8 glass tube, glue valves are working at the same time, the designed capacity is 400 pcs/h;
u Standard model is suitable for tubes in length of 600mm、900mm、1200mm(bigger size needs customization);
u Equipped independent dispensing valve for each of six glue tracks. Glue dispensing volume is accurate and fast without glue drawing, drops or leakage;
u Operation steps include: paving strips/placing tubes, glue dispensing/tubes coating, pressurization, separation, tubes picking and upside down placing;
u Pressurizing time can be set on the touch screen of controller according to glue nature
Technical Parameters
Model |
TD-1206 |
Working Range |
Max≤1200mm |
Moving Speed |
Max≤300mm/sec |
Repeat Accuracy |
±0.05mm |
Power Source |
Pressed Air+Assisting Cylinder |
Glue Dispensing Volume |
Depends on Glue Viscosity |
Glue Container capacity |
2600ml Silicone Pressure Barrel |
Glue Viscosity |
Max≤20000CPS |
Control Mode |
PLC+Touch Screen |
Programming |
Teaching Programming |
Program Capacity |
At least 100 units,4000 points/unit |
Transmission Mode |
Stepping Motor+Synchronous Belt+Linear Guide-way |
Working Pressure |
0.5-0.8Mpa |
Working Power |
AC220V 50HZ/2000W |
Working Temperature |
0-40℃ |
Working Humidity |
20-90% no condensation |
Dimension(W*D*H) |
3200*750*1550mm |
Weight |
About 300KG |
Suitable Glue: 2600ml single-component package for thermal conductive silicone
Applications: LED T8 glass tube
Send Inquiry to This Supplier
You May Also Like
-
TD-600 Desktop Three-axis Glue Dispensing MachineNegotiableMOQ: 1 Set
-
MD-2600 Manual Glue Dispensing MachineNegotiableMOQ: 1 Set
-
JD-10 Single Station Round Glue Dispensing MachineNegotiableMOQ: 1 Set
-
JD-40 Four-station Round Glue Dispensing MachineNegotiableMOQ: 1 Set
-
JD-80 Eight-station Round Glue Dispensing MachineNegotiableMOQ: 1 Set
-
JCD-80 Eight-station Punching and Glue Dispensing MachineNegotiableMOQ: 1 Set
-
TD-400 Desktop Three-axis Glue Dispensing MachineNegotiableMOQ: 1 Set
-
TD-500 Desktop Three-axis Glue Dispensing MachineNegotiableMOQ: 1 Set
-
TD-600 Desktop Three-axis Glue Dispensing MachineNegotiableMOQ: 1 Set
-
TD-6060 Floor-stand Three-axis Glue Dispensing MachineNegotiableMOQ: 1 Set
