MD-2600 Manual Glue Dispensing Machine

Principle Description

u Insert 2600ml package single component silicone into the barrel, glue will be pushed out by compressed air. Handhold glue valve control the flow of glue by pressing or releasing the switch

Machine Feature

u portable design with a small trolley, easy to move to different situation

u Hand press switch control the glow flow based on requirement, easy to operate and save labor

u Well performance of glue valve control, glue flow is stable and clean without leakage and tail

u Flexible application on many lights, components gluing

Basic Parameters

Basic operation and maintenance：

u Make the air pressure is zero before opening barrel. Lock the cover tightly after filling the glue package

u Remember to remove the cap and protective film before filling the glue package

u Do not take out the glue package when stopping using the machine, otherwise the remaining glue inside the barrel will contact with air and get cure, then the pipe will be chocked

u Remember to seal the glue nozzle with silicone oil if stop working

u Try to check compressed air supply, nozzle, valve if glue flow is not stable

u Try to replace seal rings inside the glue valve if the glue valve control performance is weakening