EDX3600 energy dispersive X- fluorescence spectrometer

Introduction:

EDX 3600 has a rapid, accurate and nondestructive, intuitive, and environmental protection five characteristics, using 25 was widespread beryllium window detector, can be accurate analysis of the gold, platinum, silver ornaments such as cicc, silver, platinum, palladium, rhodium, copper, iron, nickel, iridium, osmium, zinc content, test results completely conform to the national standard GB - 1887 "the regulation of jewelry precious metals purity and naming method" and GB/T - 18043 "the content of the precious metal jewelry nondestructive testing method X-ray fluorescence spectrometry" requirements.

Features:

Triple protection mode

Independent of matrix effect correction model

Multivariate nonlinear regression program

Any number of alternative analysis and recognition model

Electronic circuit unit of high signal-to-noise ratio

All elements test special X fluorescence analysis software

Compared with the traditional instrument, the increase of vacuum system, the effect of shielding air, significantly extended test

Using the world's best SDD silicon drift detector, lowest resolution to 139 ev, better detection of iridium and gold content in platinum

Offers a variety of collimator, minimum 0.2 mm in diameter, the accurate testing of small parts

Components selected global quality components

The vacuum chamber

Lighter elements, the analysis of the low content must use vacuum pump equipment to air out, make internal analysis of light elements in vacuum condition.

Technical Parameters

Measuring elements: from sodium (Na) to uranium (U)

Measurement object state: powder, solid and liquid

At the same time analysis element: 30 kinds of element analysis at the same time

Range of elements content analysis: 1 PPM - 99.99%

The energy resolution of: 140 + 5 ev

Measuring time: 60 s - 200 s (adjustable)

Cooling method: electrical refrigeration, no consumables

Ambient temperature: 10 ℃ to 30 ℃

Environmental humidity: 35% to 70%

The input voltage: AC 110 v / 220 v

Pressure pipe: 5 kv - 50 kv

Pipe flow: 50 mu to 1000 mu

Sample chamber size: 334 * 500 * 80 mm

Appearance size: 670 * 533 * 855 mm

Weight: 80 kg