Pharmaceutical Factory Waste Water Treatment Anionic Polyacrylamide Flocculant

Pharmaceutical Factory Waste Water Treatment Anionic Polyacrylamide Flocculant

• Multiple junction points
• Extraordinary shear resistance

• Safe and convenient to use

Polyacrylamide Flocculant
Strength of sludge flocs
      Modern advanced sludge dewatering technology requires that sludge flocs have sufficient strength to adapt to the increasingly high shear stress environment of dewatering equipment.
      High speed centrifugal dehydration can achieve higher 3500rpm speed. The separation factor of centrifuge was improved, and the shear strength of sludge floc was enhanced. The unstable flocs will break up into small flocs under the strong shear force, which will lead to the decrease of mud separation effect, turbidity of centrifugal effluent and mud biscuit degree.
      On the advanced belt filter press, because of the faster and faster belt speed and the higher tension force of the filter belt, the sludge flocs may also be not strong enough and easy to disintegrate, resulting in the "sludge running" and the decline of solid recovery rate.

strong shear liquid flocculant
      As a leading flocculant supplier in China, our company has developed a new product with excellent shear resistance solid liquid flocculant, which is especially suitable for modern high strength and high shear solid-liquid separation equipment.

Multiple junction points
      Ordinary structure of flocculant molecular chain can be easily cut off under the action of strong shear force. Polyacrylamide Flocculant have multiple bonding points through their unique molecular structure design, which greatly improves the ability to capture sludge particles and achieve rapid sludge separation, while maintaining stability under strong shear stress.

Extraordinary shear resistance
      Polyacrylamide Flocculant can effectively cope with the performance of strong shear force, and ensure excellent mud biscuit and clarity of filtered water.

Safe and convenient to use
      Solid curing time is only 40 minutes, liquid curing time is only 20 minutes; easy to prepare, can realize automatic continuous dispensing; no dust, safe to use.

 Polyacrylamide Flocculant impression drawing