Polyamine Liquid Cationic Polyelectrolyte Chemical Flocculant Manufacturer

Polyamine Liquid Cationic Polyelectrolyte Chemical Flocculant Manufacturer

flocculant manufacturers
Excess sludge with high water cut
      In modern sewage treatment plants, mechanical concentrator or concentrator-dewaterer are widely used to treat excess sludge directly from secondary clarifier. Its moisture content is generally more than 98.5%, and the maximum can reach 99.5%. High moisture content has brought about a large increase in the volume of excess sludge to be treated. The key to the treatment of excess sludge with high water content is to achieve rapid separation of slurry. For example, for the belt concentrator, in the concentrating section, the sludge with high water content is concentrated by gravity. Most of the water (80-90%) is separated quickly in a short time, and the water content is reduced to 92-94%. This requires that the flocculant must have excellent mud-water separation performance. Otherwise, the sludge containing a large amount of water will be brought into the pressure filter area, which will easily lead to the phenomenon of "mud running" and the increase of mud cake moisture content.

Rapid slurry separation
      As an advanced flocculant supplier in China, our company has developed liquid flocculant, which is especially suitable for rapid concentration and dewatering of sludge with high water content.
Fast reaction rate
      It has good solubility, easy to stretch molecular chains, complete dissociation of active groups, and more sufficient mixing with sludge particles, and faster reaction speed.
Superior mud separation performance
      The speed of sludge filtration is 2-4 times that of the general flocculant, and it can effectively reduce the concentration of suspended solids in the filtrate.
Significantly improve the processing capacity of concentration and dehydration equipment
      The dewatering speed of sludge is greatly improved. In the same time, the thickening and dewatering equipment can treat more sludge and greatly improve the treatment capacity of the equipment.
Strong shear resistant net cloth
      It can form larger and more stable sludge flocs, and is not easy to disintegrate under strong shear force. It is suitable for high-speed centrifuge and high-pressure belt conveyor, and does not stick to mesh cloth. The optimized structure of sludge floc ensures smooth dehydration and higher mud biscuit.
Safe and convenient to use
      Solid curing time is only 40 minutes, liquid curing time is only 20 minutes, easy to prepare; can realize automatic continuous dispensing; dust-free, safe to use.

flocculant manufacturers impression drawing