CAEL-S16 Probe Humidity and Temperature Transmitter
CAEL-S16 Probe Humidity and Temperature Transmitter
CAEL-S16 Humidity and Temperature Transmitter Features
• Metal probe reduce electromagnetic interference
• Interchangeable sensor for rapid maintenance
• 0 - 100%RH measurement,
• Probe pressure up to 10 bar
• Calculated hygrometric outputs
• Two channel with selectable physical quantity
• Unit support metric or imperial
CAEL-S16 Humidity and Temperature Transmitter Applications
• Semiconductor and microelectronics industry
• Food production and packaging
• Agriculture, farms
• Environmental chambers, drying equipment, spraying equipment
• Greenhouse, storage room, cooling chamber
• HVAC
CAEL-S16 Humidity and Temperature Transmitter Technical Data
| Humidity | |
| Measurement range |
0 - 100 %RH |
| Accuracy (including non-linearity, hysteresis, and repeatability) | |
| CAEL-S16A |
1.5%RH@25℃ (20 - 80%RH) ±2%RH@25℃ (0 - 20/80 - 100%RH) |
| CAEL-S16 |
2%RH@25℃ (20 - 80%RH) ±3%RH@25℃ (0 - 20/80 - 100%RH) |
| CAEL-S16B |
3%RH@25℃ (20 - 80%RH) |
| Temperature coefficient (from 0°C to 80°C) |
typ. ±0.02%RH/℃ |
| Humidity Hysteresis |
±1%RH |
| Recovery time after 150 hours of condensation |
10 second |
| Long term drift |
|
| Response Time (at 63% of signal) from 33 to 75%RH |
5 second (at 1m/s air flow) |
| Temperature | |
| Measurement range |
-40 ~ 105℃ |
| Accuracy (including non-linearity, hysteresis, and repeatability) |
±0.7℃ (-40 ~ 5℃) ±0.3℃ (5 ~ 60℃) ±0.9℃ (60 ~ 105℃) |
| Long term drift |
|
| Analog output (two channels) | |
| Voltage version |
0 - 1 V / 5 V / 10 V |
| Accuracy of analog outputs at +25 °C |
±0.1% full scale |
| Temperature dependence |
±0.005%/°C full scale |
| External loads |
current output RLvoltage output 0 - 1 V output RL > 2k ohm 0 - 5 V and 0 - 10 V outputs RL > 10k ohm |
| RS485 output with Modbus RTU | |
| ID |
1 - 247 |
| Baud rate |
9600/ 19200/38400/57600/115200 |
| Data format |
N81/N82/E81/E82/O81/O82 |
| Psychrometric calculations (option) | |
| (Td) dew point temperature, (Tf) frost/dew point temperature, (R) mixing ratio, (A) absolute humidity, (S) enthalpy, (Tw) wet bulb temperature, (E) water vapor pressure | |
| Power supply | |
| Analog output 0-1V |
5 - 28VDC |
| Analog output 0-5V / 10V |
15 - 28VDC |
| RS485 output |
12 - 28VDC |
| Power consume (25 °C, V+ 24 VDC) | |
| Analog output |
typ. 3mA |
| RS485 output |
typ. 3mA |
| Mechanics | |
| Probe material |
brass nickel-plated |
| Probe pressure |
10bar |
| Housing classification |
IP65 |
| Cable |
M12 4-pin 2M female |
| Operation Temperature range | |
| -40 ~ 105°C (-40 ~ 221°F) | |
| Electromagnetic compatibility | |
| EN61326-1:2013 Emission | |
| CISPR11:2009+A1:2010 Group 1 Class B | |
| EN61326-1:2013 Immunity | |
| IEC 61000-4-2:2008 | |
| IEC 61000-4-3:2006+A1:2007+A2:2010 | |
| IEC 61000-4-8:2009 | |
CAEL-S16 Humidity and Temperature Transmitter Ordering Guide
| Model |
Output |
Temperature Scale |
Psychrometric calculations (Option) |
| CAEL-S16A CAEL-S16 CAEL-S16B |
0 - 10V (3) 0 - 5V (5) 0 - 1V (6) RS485 (4) |
0 - 50°C (1) 0 - 100°C (2) By order (S) none (X) |
Yes (M) No |
CAEL-S16-31M
Humidity accuracy: ±2%RH (20 - 80%RH)
Output: 0 - 10V
Temperature Scale: 0 ~ 50°C
Option - Psychrometric calculations: Yes
Send Inquiry to This Supplier
You May Also Like
-
RHT 2-wire Humidity TransmitterNegotiableMOQ: 1 Piece
-
TSEV01CL55 Thermopile Sensor Module Infrared Temperature SensorNegotiableMOQ: 1 Piece
-
TS318-1B0814 Infrared Thermopile Temperature SensorUS$ 1 - 1MOQ: 1 Piece
-
HTF3000LF Relative Temperature and Humidity Sensor ModuleNegotiableMOQ: 1 Piece
-
HTU20D Digital Relative Humidity and Temperature SensorNegotiableMOQ: 1 Piece
-
HTG3535CH Humidity and Temperature Sensor Module With Voltage OutputUS$ 1 - 1MOQ: 1 Piece
-
HTG3515CH Voltage Output Temperature and Humidity SensorNegotiableMOQ: 1 Piece
-
HS1101LF Relative Humidity SensorNegotiableMOQ: 1 Piece
-
HTF3226LF Frequency Output Temperature and Humidity SensorNegotiableMOQ: 1 Piece
-
HTU21D Digital Temperature and Humidity SensorUS$ 3 - 5MOQ: 1 Piece