Contact Platform Support
Help CenterBourns SF-0603SP200-2 Cross 1608 Metric SMD SingleFuse Slow Blow Surface Mount Fuse 2A 32VDC For Overcurrent Protection
Related Products
-
3216FF1.5-R 1206 Fast Blow SMD Chip Encapsulation Surface Mount Fuses 32VAC DC 1.5A With UL CSA RoHS Reach ApprovedUS$ 0.04 - 0.05MOQ: 3000 Pieces -
Bourns SinglFuse SF-2410FP100W-2 Cross UL 248-14 Precision Wire Core Surface Mount Fuses SEF 1.0A Fast Acting 2410US$ 0.03 - 0.05MOQ: 1000 Pieces
-
Sartfuse S1032-F Cross NANO 10.25x3.2 mm R1032 Series High Current Fast-Acting Surface Mount Fuse 250Vac 50mA-15AUS$ 0.2 - 0.3MOQ: 2000 Pieces
-
10.25x3.2mm Brick High Inrush Type Surface Mount Fast Blow Ceramic Tube Fuse 125VAC With Max. Current 30AUS$ 0.2 - 0.3MOQ: 2000 Pieces
-
6.3A 300VAC 2410 SMD Fast-acting Brick Square Shape Surface Mount Fuse SSF1630 For Power SupplyUS$ 0.035 - 0.04MOQ: 1000 Pieces
Bourns SF-0603SP200-2 Cross 1608 Metric SMD SingleFuse Slow Blow Surface Mount Fuse 2A 32VDC For Overcurrent Protection
Description
06.110 Series are the fuses set the industry standard for performance, reliability and quality. The solder-free design provides excellent on-off and temperature cycling characteristics during use and also makes our SMD fuses more heat and shock tolerant than typical subminiature fuses.
Features
Time lag thin film chip fuse for overcurrent protection
1608 (EIA 0603) miniature footprint
Surface mount packaging for automated assembly
UL listed (UL 248-14)
RoHS compliant* and halogen free
High inrush current withstanding capability
Compatible with reflow and wave solder
Ceramic and glass construction
Excellent environmental integrity
One time positive disconnect
Lea free and Halogen free material
AEC-Q200 Automotive Grade Certified
Application
Secondary protection for space constrained applications:
Cell phone DVD player
Hard disk drive
Portable memory
LCD monitors
PDAs
Digital cameras
Rechargeable battery packs
Battery chargers
Set top boxes
Industrial controllers
Clear Time Electrical Characteristics
| Clear Time Electrical Characteristics | |||
| Rated Current | 1.0In | 2.0In | 2.5In |
| 1A~8A | 4 hour minimum | 1~60 sec | 5 sec maximum |
Electrical Characteristics
| Part No. |
Rated Voltage DC |
Rated Current (A) |
Breaking Capacity (A) 1 | Typical Cold. Resistance (mOhms) 2 | Typical Voltage Drop (mV) | Typical Pre-Arcing I2t (A2Sec) 3 | Alpha Mark |
| 06 110 1 | 32V | 1 | 50A | 257.5 | 295 | 0.018 | B/H |
| 06 110 1.5 | 1.5 | 50A | 137.5 | 220 | 0.065 | H | |
| 06 110 2 | 2 | 50A | 72 | 160 | 0.115 | K | |
| 06 110 2.5 | 2.5 | 50A | 52 | 145 | 0.14 | L | |
| 06 110 3 | 3 | 50A | 35 | 130 | 0.21 | O | |
| 06 110 3.5 | 3.5 | 50A | 23.8 | 130 | 0.55 | R | |
| 06 110 4 | 4 | 50A | 21 | 120 | 0.52 | S | |
| 06 110 5 | 5 | 50A | 14 | 110 | 1.70 | T | |
| 06 110 6 | 6 | 50A | 8 | 110 | 2.30 | V | |
| 06 110 7 | 7 | 50A | 5.6 | 90 | 3.0 | X | |
| 06 110 8 | 8 | 50A | 3.5 | 80 | 5.2 | Z |
* DC Interrupting Rating (Measured at rated voltage, time constant of less than 50 microseconds, battery source)
* DC Cold Resistance are measured at
* Typical Pre-arching I2t are measured at 10In Current
Dimension (Unit: mm/inch)
Clear Time Curve
Reliability Testing
| Parameter | Requirement | Test Method |
| Carrying Capacity | No fusing | Rated current, 4 hours |
| Fusing Time | Within 120 seconds | 200 % of its rated current |
| Interrupting Ability | No mechanical damages | After the fuse is interrupted, rated voltage applied for 30 seconds again |
| Bending Test | No mechanical damages . | Distance between holding points: 90 mm, Bending: 3 mm, 1 time, 30 seconds |
| Resistance to Solder Heat | ±20 % | 260 °C ±5 °C,10 seconds ±1 second |
| Solderability | 95 % coverage minimum | 235 °C ±5 °C, 2 ±0.5 second 245 °C ±5 °C, 2 ±0.5 second (lead free) |
| Temperature Rise | 100 % of its rated current, measure of surface temperature | |
| Resistance to Dry Heat | ±20 % | 105 °C ±5 °C,1000 hours |
| Resistance to Solvent. | No evident damage on protective coating and marking | .23 °C ±5 °C of isopropyl alcohol, 90 seconds |
| Residual Resistance | 10k ohms or more | Measure DC resistance after fusing |
| Thermal Shock | . DR | -20 °C / +25 °C /+125 °C /+25 °C, 10 cycles |
Environmental Characteristics
| Operating Temperature | -20 °C to +105 °C |
| Storage Conditions-Temperature | +5 °C to +35 °C |
| Storage Conditions- Shelf Life | 2 years from manufacturing date |
| Storage Conditions-Humidity | 40 % to 75 % |
| Moisture Sensitivity Level | 1 |
| ESD Classification (HBM) | Class 6 |
Package information
Model Q’ty/Reel
06 110 X 5000 pcs
Note: Reel packaging per EIA-481-1 standard
Send Inquiry to This Supplier
You May Also Like
-
Withstand Inrush CQ24LT 002 6.1x2.6mm Ceramic Time Lag Chip Fuse 2A 350V 6125 For LED Lighting Overcurrent ProtectionUS$ 0.1 - 0.15MOQ: 1 Roll
-
CQ24LF 001 6.1x2.6mm Fast Acting SMD Fuse 2410 350V 1A With Silver Plating Interrupting Capacity 100AUS$ 0.1 - 0.15MOQ: 2500 Pieces
-
High Voltage Explosion Proof 10.1x3.1mm 4012 Time Delay Surface Mount Fuse 1A 600VAC 350VDCUS$ 0.2 - 0.4MOQ: 1000 Pieces
-
UL CUL 10.1mmx 3.1mm 4012 Fast-Acting Chip Fuse CQ40LF 500mA-40A 600VAC 350VDC With High Inrush High Breaking CapacityUS$ 0.2 - 0.4MOQ: 1000 Pieces
-
AEC-Q200 Automotive Grade Certified EIA 1206 3216 Metric Slow Blow Surface Mount Chip Fuse 2.5A 24V 32V 63VDC 72VACUS$ 0.04 - 0.06MOQ: 3000 Pieces
-
Littelfuse 467 Series Cross 0603 Size Thin Film Very Fast-Acting Surface Mount Fuses With Rating 250mA-8A 63VDC 32VDCUS$ 0.03 - 0.06MOQ: 5000 Pieces
-
Surface Mount Fuses SMD FuseUS$ 0.1 - 1MOQ: 3000 Pieces
-
Surface Mount FuseUS$ 1 - 100MOQ: 10 Pieces
-
Surface Mount FuseUS$ 0.06 - 0.08MOQ: 5000 Pieces
-
Surface Mount Fuses,SMD FuseNegotiableMOQ: 1000 Pieces
