APW ultra-high pressure CNC water jet cutting machine

Waterjet cutting machine have 4 key components, such as intensifier pump, cutting table, auto abrasive deliver system and cnc controller.

The technical parameters for CNC waterjet cutting machine showing in the following chart:

A waterjet cutting machine is made up of 4 key components, that is Intensifier pump; Cutting table; CNC controller; Auto abrasive feeder
Intensifier    Pump	Max. water pressure	410Mpa
	Continuous working pressure	360-380Mpa
	Max. oil pressure	20Mpa
	Motor power	37KW/50HP
	Cutting water inlet pressure	0.3Mpa
	Cooling water inlet pressure	0.3Mpa
	Power supply	380V/50HZ/3PH
	Max. flow rate	3.7L/Min
	Oil tank volum	30Gal.(114L)
Cutting Table	Structural style	Cantilever style
	Cutting area	3000x2000x150mm
	Max. moving speed for X/Y-axis	6000mm/min
	Max. moving speed for Z-axis	1000mm/min
	Load bearing	500kg/ Squre meter
	Control accuracy	0.01mm
	Cutting accuracy	0.1mm
	Power supply	220V
	Way of drive	AC Servo
	X/Y-axis structure	Aluminum structure
Cutting Head	Mode	3-axis
	Max. orifice diameter	0.33mm
	Max. nozzle diameter	1.02mm
	Z-axis step motor	0.9N.M
CNC Controller	15 inch LCD monitor
	Support DXF and NC code file
	Software: Windows XP
	Resistance of the shoch and electro-magnetic
	The key function
	Forward & backward processing function		Even pace control function
	Small arcs speed auto processing function		Circle processing function
	Partial and smooth processing modes
Abrasive Feeder	Max. inlet air pressure	0.6Mpa
	Min. inlet air flow	0.028m3/min
	Abrasive capacity	225KG
	Features
	Air valve to prevent jams and breakages	Self sealing
	Auto control with CNC auxiliary function	Slightly adjust the flow

Dual-Core Waterjet Debut

APW pioneered “Dual-Core” waterjet, which integrated SIEMENS motor, imported REXROTH hydraulic pump and hydraulic valves assembly, American A&V intensifier, American high pressure tube and stainless steel water tank. This dual intensifiers design (waterjet cutting machine) represents another landmark in APW history.

They has been widely used in all APW waterjet series. UP to now, APW is still the only waterjet manufacturer holding this advanced technology in China.

Imported components 

We adopt the imported component of CNC waterjet cutting machine like Rexroth hydraulic pump; USA intensifier; Siemens motor;Omron PLC; Yaskawa servo drive; Yuken direction control valves etc. The whole parts of Intensifier are assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.

CNC waterjet cutting machine can cut almost any material. Pure waterjets can quickly and accurately cut soft materials such as rubber, foam and other gasket material. Abrasive waterjets can cut almost any other material over a very wide range of thickness:

The features cnc waterjet cutting machine

1 It does not cause heat effect or detormation or tiny cracks
2 It can cut any complex and flat figures
3 Narrow kerfs
4 Smooth incision
5 Minimize dust and toxic fumes, provice healthier working environment
6 It can be adjested easily and quickly by the designs and materials
7 Low processing cost in unit time
8 Components are of high quality and spare parts are cheap
9 Drilling holes to avoid water permeate the composite materials
10 Reduce setting time and fixture cost

CNC waterjet cutting machine be packed in standard packing, suitable for long distance ocean transportation and well protected against damage, moisture, shock, rust and handling.

All-powerful Science & Technology Stock Co.,Ltd, a sino-US joint venture, which was established at 2001 and located in the Export Processing Zone of Liaoning Provence, All-powerful is the largest new high-tech enterprise integrated the reserch and development of cnc waterjet ceramic tile cutting machine, and an important base for developing high-end ultral-high pressure waterjet industry of china.

Our mission is to help our customers solve their manufacturing challenges and achieve their highest level of productivity,precision and accuracy.

More information about APW waterjet cutting machine price pls contact us at hotline: +86-024-24699053