MB1014 LV-ProxSonar-EZ1 High Performance Ultrasonic Rangefinder

MB1014 LV-ProxSonar-EZ1
High Performance Ultrasonic Rangefinder 

MB1014 LV-ProxSonar-EZ1 Ultrasonic Rangefinder Product Description

These ultrasonic proximity sensors detect objects in a calibrated detection zone. The LV-ProxSonar-EZ sensors report when an object (such as a person) enters the detection zone. The target is released after leaving the LV-ProxSonar-EZ detection zone.

The LV-ProxSonar-EZ1 has a detection zone of ~5 feet and will allow for 8+ simultaneous sensors.

MB1014 LV-ProxSonar-EZ1 Ultrasonic Rangefinder Product Specifications
• Resolution of 1 inch
• ~2.5 second target acquire time*
• ~1.5 second target release time*
• Automatic multi-sensor operation
• People sensor
• Maximum reported range of 254 inches (645 cm)
• ~5 foot proximity detection zone (60 inches or 152 cm)
• Run up to 8+ sensors in the same environment
• Choice of 2 digital outputs: Logic Level (High/Low) and RS232 serial
• 42kHz Ultrasonic sensor measures distance to objects
• RoHS Compliant
• Read from sensor outputs: Serial and Pulse Width
• Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches
• Operates from 2.5-5.5V
• Low 2.0mA average current requirement
• Small, light weight module
• Designed for easy integration into your project or product
• Good balance between long and short range detection zone
*Custom times available for a nominal NRE fee

MB1014 LV-ProxSonar-EZ1 Ultrasonic Rangefinder Part Numbers
All part numbers are a combination of a six-character base followed by a dash and a three-digit product code. Please review the following table for more information on the three-digit product code.

The following table displays all of the active and valid part numbers for this product.