Fiber Identifier

MODEL: BD-IF400

General Description:

The Live Fiber Identifier allows you to detect traffic and measure signals anywhere onsinglemode fibers without having to disconnect them . It also lets you check for signal presence before rerouting or maintenance , perform continuity tests and verify cable labeling. Based on non-destructive macrobending technology,the fiber identifier doesn't disrupt traffic,damage or overstress the fiber,enabling efficient,accurate and reliable data acquisition

Features:                                                          

●Indicate the signal directions in fiber;

●Indicate the signal presence or absence(Live or dark fiber);

●Detect tones 270Hz, 1kHz and 2kHz to verify the modulated signal type;

●Suitable for 0.25, 0.9, 2.0, 3.0mm fiber,and no need to replace the clamp block,

more convenient than others

●Build in VFL 1mW or 10mW optional

●Battery low indication;

●Powered by 2 units of 1.5V AA batteries;

●One-year warranty and Three-year recommended calibration interval

Specification

* at 20±3℃,indoor, 1550nm wavelength, 0.9mm fiber, with white coat, 270Hz, error<5

* 0.25, 2.0, 3.0mm fiber, the performance at continuous wave will be lower

* 1KHz, 2KHz, the performance at modulated signal will be lower

* at 1310nm wavelength, the performance will be lower