1880mm high speed toilet paper machine, corrugated paper machine

The 1880 toilet paper machine and corrugated paper machine adopt white paper edge, waste books and periodicals, magazines and white Pulpboard to produce paper for daily use, corrugated paper, box board and culture paper. (configure equipment specifications according to the needs of customers' production paper varieties)

1880 main technical parameters of high speed tissue paper machine:

1, production varieties: toilet paper

2, effective width: 1880mm

3, quantitative: 17-40g/m2

4, output: 4-5 tons / day.

5, design speed: 180m/min

6, working speed: 80-140m/min

7, gauge: 2800mm

8. Pressurization mode: pneumatic compression.

9. Transmission mode: sectional drive, AC variable frequency speed regulation.

10, about the mobile phone: customer choice

(two) main structure and configuration of paper machine

1. water extruding 1 sets

> 300 2450mm cast iron roller, 1 cast iron rollers, mechanically pressurized.  Bearing adopts centring bearing 113520.

2. garden net cage 1 sets

* 1500 * 2350mm stainless steel mesh cage 1. The mesh wheel shaft is made of carbon steel and thick-walled steel pipe, the spoke is made of high-strength cast iron, and the stainless steel water guide sheet is wrapped outside to improve the filtering speed. The wrapped sheet size is 1.5mm.

The bearing adopts centring bearing 113520.

The bearing shell is cast iron material and adopts labyrinth seal structure to prevent seepage and protect bearings.

Dynamic balance treatment.

3. volts 1 sets

_400 2350mm rubber roller is installed on the net surface, the thickness of rubber is 25mm, the hardness of rubber is 35-38 degrees, and the maximum linear pressure is 3kg/cm2.

Bearings 312. The bearing shell is cast iron material, and adopts labyrinth seal structure to prevent seepage and protect bearings.

Seven bar rack, square rack, ground rail, and pressure arm.

Dynamic balance treatment.

4. 1 sets of wind net cage.

The cage is made of high density polyethylene board with inlet, boxes, air inlet and observation holes.

The sizing is in the main pipe, and the adjustable movable arc board is used for sizing. The arc strip is made of wood.

Pressure fans and sealing strips are self provided.

5. 3 vacuum boxes.

The iron box panel is made of high density polyethylene (HDPE) and the opening shape is hole or slot. The device can rotate at high angle and the air extracting device is located at the transmission side.

Vacuum pump user self matching.

6. the number of guide rollers is matched according to the drawing.

> 159 * 2450mm, 10mm thick seamless steel tube processing, under red bulkhead, surface FRP mounting.

The bearing box is made of cast iron, the bearing is double row centripetal ball bearing 309/310, and the ball tile is centring.

Dynamic balance treatment.

7. stretch rollers 1

_173 *2450mm, 10mm thick seamless steel pipe processing, red down stuffy head, surface coating, rubber hardness 90 degrees, car forward and backward threads, used for stretching wool cloth.

The bearing box is made of cast iron, the bearing is double row centripetal ball bearing 309/310, and the ball tile is centring.

Dynamic balance treatment.

8. 1 high pressure water sprinkler pipes.

The water pressure mobile sprinkler device is made of stainless steel.

9. drying Department 1.

2500 x 2350mm, HT250 cast iron dryer, inner wall vertical turning, rough surface, finish turning, grinding machine grinding, smoothness more than 9, Brinell hardness more than 210 degrees.

The design pressure is 0.3MP, the experimental water pressure is 0.6MP, and the bearing adopts the spherical roller bearing 3113156.

Dynamic balance treatment.

Contain siphon and rotate the steam head.

10. 1 rollers

_500 2350mm, HT250 cast iron cots, rubber thickness 25 mm, surface pick groove, rubber hardness 95 degrees, three curved corrugated tire pressure, with steam control box. Use bearing 113628.

Dynamic balance treatment.

11. scrapers 2 handles.

The scraper is pressurized by the cylinder and the air bag, so that each pressure mark is evenly and gently pressed on the scraper and the cylinder surface, making it wrinkle evenly, and protecting the cylinder surface.

12. hood 1.

Breathing hood 1, with axial fan, blower.

13. transmission part

650 speed reducer, M12, Z170 cast iron big teeth wheel, small roller and coupling.

Motors and inverter users are self provided.

14. tight blankets, blankets and blankets shall be matched according to the design requirements of the drawings.

15. rolls of paper cold cylinder

900 2350mm cold cylinder 1, with reducer, paper roller, bow roll, roll roll, etc.

16. rack section

All are cast iron trough rack and square box rack, including floor track, anchor bolt, iron pad, diagonal iron and so on.

Sales manager: hao yingfeng +86-13603894288

Email：940746614@qq.com

WhatsApp: 86-13603894288

imo: 86-13603894288

Email: 940746614@qq.com