Contact Platform Support
Help CenterNylon Powder Coating Machine /powder Spray Equipment
Related Products
-
Plastic Powder Spraying Machine for Exterior of Ship ,pipes,valves Corrosion ResistantUS$ 3799 - 5799MOQ: 1 Set -
Blasting Machine / Sandblaster For Sale,Turntable Sandblast MachineUS$ 1500 - 1650MOQ: 1 Set
-
Spraying Room, Sandblasting Room, Soundproofed RoomUS$ 3000 - 20000MOQ: 1 Set
-
Rough Surface Treatment Machine ,surface Roughing Machine,surface Treatment MachineUS$ 2000 - 20000MOQ: 1 Set
-
Metal Surface Rougher Treatment MachineUS$ 2000 - 20000MOQ: 1 Set
SX6018 is kind of nylon powder coating machine ,our company has improved the design on the basis of flame spray equipment of France SNMI company and British SCHORI company.It can spray all kind of thermosetting plastic powders, such as polyethylene (PE), nylon, polyolefin (PO), etc.
1.Construction of SX-6018 nylon powder coating machine
SX6018 nylon powder coating machine consists of plastic spraying gun, powder feeder, pipeline and gas path regulator. The user only should prepare air compressor with 0.9 m3 / min , oxygen, acetylene gas,decompression table of oxygen acetylene , line pipe.
2. Principle of SX-6018 nylon powder coating machine
SX6018 nylon powder coating machine adapts the special powder feeder hose to send powder and flame by plastic gun, produce heat source with the aid of oxyacetylene, compress air jets of gas to protect flame flow,heat spraying plastic powder to melt plastic state or condition, spraying the surface after pretreatment ,
3.parameters of SX6018 nylon powder coating machine
| item | gas parameyer | plastic powder variety | preheat temperature | thermal resistant temperatur e of layer | |
fuel gas |
working pressure of acetylene/MPa | 0.10~0.12 | high pressure polyethylene | 120~150 ℃ |
-70~+60 ℃
|
| low pressure polyethylene |
150~200 ℃
|
-70~+75 ℃
|
|||
| orking pressure of oxygen/MPa | 0.50~0.60 | nylon 11 |
170~230℃
|
-50~+80 ℃
|
|
| nylon 12 |
170~230 ℃
|
-50~+80 ℃
|
|||
4. Characteristic of SX-6018 nylon powder coating machine
nylon powder coating machine mainly used to spray plastic on large-scale corrosion resistant live project . The characteristic is that the coating layer is thick , operation is simple, the equipment is easy to carry, and can be used for site construction.
compared to electrostatic powder coating and fluidized bed coating, the nylon powder coating machine are of advantages below:
(1 )The cost of equipment is low, without special spraying room, drying room.
(2) Portable and easy to carry, can be on-site construction, spraying process can not be limited by workpiece size and shape.
(3) can work in 100% relative humidity, low temperature environmental conditions
(4) Powder coating materials do not contain solvents, do not need drying curing time after spraying.
(5) can spray a variety of substrate materials such as steel, concrete and so on.
(6) coating layer can be repaired, for the small defect part, as long as you heat the surface then it can be repaired, for large defect part,you can re-spray and repair it
(7 )easy to change powder and color
5. the application range of SX-6018 nylon powder coating machine
Can directly spray all kinds of plastic coating of acid, alkali, salt , no need the heat curing device, especially suitable for the scene of large area flame plastic spraying construction, in the aspect of anti-corrosion performance, operating technology ,and operating environment ,it can take place of heavy anti-corrosion coating and glass steel lining.
6. Application Examples of SX-6018 nylon powder coating machine
(1) Resistant to various corrosive media containers: liquor, beer, milk, salt, food, sewage treatment equipment, power plant steel desalting water tank, including ultrafiltration water tank, first-level freshwater box, two-class freshwater tank, water tank and other anti-corrosion, using the United States imported EAA plastic powder large Area Flame Spray site construction.
(2)All kinds of steel structure anti-corrosion, decoration, insulation, wear-resistant, antifriction: petrochemical, power plant large storage tanks and west-East gas pipeline two-layer PE and three-layer PE anti-corrosion pipe welded joints On-site repair, highway guardrail, municipal lighting pole, stadium grid engineering, water pumps, chemical fan, printing press nylon drum, car spline shaft, Electroplating hanging fixture and so on
(3)Marine steel structure and harbor Facilities: Bridge Foundation, Breakwater, Banqiao, steel pipe pile, plate pile, trestle, buoy, etc. to prevent seawater corrosion.
some pictures for reference :
If you are interested in it our machine ,please contact me,I will offer you more details accordingly,thanks
Send Inquiry to This Supplier
You May Also Like
-
2mm Stainless Steel Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
2mm Zinc Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
2mm Zinc Aluminum Copper Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm Nickel Chrome Alloy Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm High Carbon Steel Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm Wear-resistant Alloy Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm Babbitt Alloy Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm Brass Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
1.6~3.2mm SS304 Wire Arc Spray Gun, Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
-
Arc Spray Gun, Zinc Wire Arc Spray Coating Gun for Arc Spray Coating MachineUS$ 750 - 900MOQ: 1 Piece
