Contact Platform Support
Help CenterRigol DP832 Programmable Linear DC Power Supply 3 Channels
Related Products
-
Nandrepair Disassemble Repair Tool For IQOS Electronic CigaretteUS$ 30 - 40MOQ: 1 Piece -
WT10A Gaussmeter Tesla Meter WT-10A Surface Magnetic Field TesterUS$ 50 - 83MOQ: 1 Piece
-
RIGOL DP832A 3 Channels Programmable Regulator DC Power SupplyUS$ 500 - 618MOQ: 1 Piece
-
Autel MaxiDiag MD808 Pro All Modules Scanner MD802 ALL+MaxicheckProUS$ 280 - 300MOQ: 1 Piece
-
WL Baseband Logic Chip IC Test Fixture For IPhone 6P 6S 6SP 7/7PUS$ 50 - 99MOQ: 1 Piece
Rigol DP832 Programmable Linear DC Power Supply 3 Channels
The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time in a powerful new package. The DP800 Series is a family of linear power supplies systems with 1, 2, or 3 outputs and up to 200 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications. Built in V, A, and W measurements make power monitoring easy, but additional wave tracking, timing, and analysis features in the advanced A series supplies means there are even more ways to use the instruments. New digital triggering between instruments also makes it possible to reliably combine and connect supplies together. Intuitive to use for everything from education labs to the R & D bench, the DP800 family of power supplies provide incredible value for any application. Select the value models for best price performance or upgrade to the A model to improve resolution and add advanced monitoring, triggering, and programming capabilities.
Rigol DP832 Features:
3 Outputs; total power up to 195W
Low Ripple NoiseFast transient response time:Channel isolation: CH1 || CH2,CH3
OVP/OCP/OTP protection functions
Built in V, A, W measurements and waveform display
Support for output Delay, Analysis, Monitor, and Preset function
3.5 inch TFT Display
Connectivity including USB Host & Device, LAN, and Digital IO
Low Ripple and Noise:
| Model | DP832 | |
| Channels | 3 | |
| DC Output (0°C to 40°C ) | ||
| Voltage/current | CH1: 0 to 30V/0 to 3A CH2: 0 to 30V/0 to 3A CH3: 0 to 5V/0 to 3A |
|
| OVP/OCP | CH1: 10mV~33V/1mA~3.3A CH2: 10mV~33V/1mA~3.3A CH3: 10mV~5.5V/1mA~3.3A |
|
| Load Regulation Rate ±(Output Percentage + Offset) | ||
| Voltage | ||
| Current | ||
| Linear Regulation Rate ±(Output Percentage + Offset) | ||
| Voltage | ||
| Current | ||
| Ripples and Noise (20Hz to 20MHz) | ||
| Normal Mode Voltage | ||
| Normal Mode Current | ||
| Common Mode Current | ||
| Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset) | ||
| Programming | Voltage | 0.05% + 10mV |
| Current | 0.2% + 10mA | |
| Readback | Voltage | 0.05% + 5mV |
| Current | 0.15%+ 5mA | |
| Resolution | ||
| Programming | Voltage | 10mV With high-resolution option: 1mV |
| Current | 1mA | |
| Readback | Voltage | 10mV With high-resolution option: 0.1mV |
| Current | 1mA With high-resolution option: 0.1mA |
|
| Display | Voltage | 10mV With high-resolution option: 1mV |
| Current | 10mA With high-resolution option: 1mA |
|
| Transient Response Time | ||
| Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa. | ||
| Command Processing Time [2] | ||
| Temperature Coefficient per? (Output Percentage + Offset) | ||
| Voltage | CH1/CH2: 0.01%+5mV CH3: 0.01%+2mV |
|
| Current | 0.01%+2mA | |
| Stability [3] ±(Output Percentage + Offset) | ||
| Voltage | CH1/CH2: 0.02%+2mV CH3: 0.01%+1mV |
|
| Current | 0.05%+2mA |
|
Timing output
When the timer is enabled, the instrument outputs the preset voltage and current values (at most 2048 groups). Users can set the number of output groups of the timer as well as the voltage, current and timing time of each group.
V/A/W Display
Built-in V, A, W measurements and waveform display
Output Analysis, Monitor
Support more advanced functions: recorder, analyzer, monitor and trigger.
Large screen display with 3.5' LCD
Support 4 display modes: normal, waveform, dial and classic.
Send Inquiry to This Supplier
You May Also Like
-
Autool SDT-202 Smoke Leak Detector SDT 202 Automotive Leak LocatorUS$ 150 - 190MOQ: 1 Piece
-
Jinhan JDS2012A Handheld 1 Channels 20MHz Oscilloscope MultimeterUS$ 50 - 98MOQ: 1 Piece
-
Jinhan JDS2022A Digital Oscilloscope Double-channel 20MHz MultimeterUS$ 100 - 135MOQ: 1 Piece
-
IP BOX II High Speed Programmer IPBOX V2 Nand Flash RepairingUS$ 200 - 299MOQ: 1 Piece
-
JC T7 T8 NAND Hard Disk Test Fixture Mainboard Boot Test Brush TesterUS$ 100 - 129MOQ: 1 Piece
-
Charging Port Dock Connector Flex Cable With Home Button Return Without Fingerprint RepairUS$ 44 - 50MOQ: 1 Piece
-
Multi-Function Limited Torque Screwdriver Disassembly Bolt DriverUS$ 30 - 39MOQ: 1 Piece
-
FBGA119P Test Socket FBGA119 Flash Adapter For UP-828PUS$ 200 - 288MOQ: 1 Piece
-
UP828P Ultra Programmer UP-828P Laptool ProgrammerUS$ 1000 - 1079MOQ: 1 Piece
-
EBGA64 Memory Flash Adapter EBGA64P IC Test Socket EBGA64APUS$ 120 - 180MOQ: 1 Piece
