ADI AD7616BSTZ NEW and ORIGINAL 18+ LQFP (Dual Simultaneous Sampling ADC)
AD7616BSTZ
(ADI New and Original)
16-Channel DAS with 16-Bit, Bipolar Input, Dual Simultaneous Sampling ADC
Features and Benefits
16-channel, dual, simultaneously sampled inputs
Independently selectable channel input ranges
True bipolar: ±10 V, ±5 V, ±2.5 V
Single 5 V analog supply and 2.3 V to 3.6 V VDRIVE supply
Fully integrated data acquisition solution
Analog input clamp protection
Input buffer with 1 MΩ analog input impedance
First-order antialiasing analog filter
On-chip accurate reference and reference buffer
Dual 16-bit successive approximation register (SAR) ADC
Throughput rate: 2 × 1 MSPS
Oversampling capability with digital filter
Flexible sequencer with burst mode
Flexible parallel/serial interface
SPI/QSPI/MICROWIRE/DSP compatible
Optional cyclic redundancy check (CRC) error checking
Hardware/software configuration
Performance
92 dB SNR at 500 kSPS (2× oversampling)
90.5 dB SNR at 1 MSPS
−103 dB THD
±1 LSB INL (typical), ±0.99 LSB DNL (maximum)
8 kV ESD rating on analog input channels
On-chip self detect function
80-lead LQFP package
- Product Details
The AD7616 is a 16-bit, DAS that supports dual simultaneous sampling of 16 channels. The AD7616 operates from a single 5 V supply and can accommodate ±10 V, ±5 V, and ±2.5 V true bipolar input signals while sampling at throughput rates up to 1 MSPS per channel pair with 90.5 dB SNR. Higher SNR performance can be achieved with the on-chip oversampling mode (92 dB for an oversampling ratio (OSR) of 2).
The input clamp protection circuitry can tolerate voltages up to ±21 V. The AD7616 has 1 MÙ analog input impedance, regardless of sampling frequency. The single-supply operation, on-chip filtering, and high input impedance eliminate the need for driver op amps and external bipolar supplies.
The device contains analog input clamp protection, a dual, 16-bit charge redistribution SAR analog-to-digital converter (ADC), a flexible digital filter, a 2.5 V reference and reference buffer, and high speed serial and parallel interfaces.
The AD7616 is serial peripheral interface (SPI)/QSPI™/DSP/ MICROWIRE compatible
Send Inquiry to This Supplier
You May Also Like
-
ADCMP361YRJZ-REEL7 ADI NEW and ORIGINAL 16+ SOT23 (Single 0.275% Comparator and Reference With Dual Polarity Outputs)US$ 1.0 - 1.5MOQ: 100 Pieces
-
AD823ARZ-RL ADI NEW and ORIGINAL 17+SOP (16 MHz, Rail-to-Rail FET Input Dual Amplifier)US$ 2.35 - 2.55MOQ: 100 Pieces
-
ADI AD7891ASZ-1 NEW and ORIGINAL 17+ QFP (12-Bit High Speed Data Acquisition System)US$ 15.5 - 16.5MOQ: 100 Pieces
-
OP4177ARZ ADI NEW and ORIGINAL (Precision Low Noise, Low Input Bias Current Quad Op Amp)US$ 1.7 - 1.8MOQ: 100 Pieces
-
ADM2483BRWZ-REEL ADI NEW and ORIGINAL 18+SOP (Half-Duplex, ICoupler Isolated RS-485 Transceiver)US$ 2.35 - 2.55MOQ: 1000 Pieces
-
AD8138ARMZ-REEL7 ADI NEW and ORIGINAL 18+MSOP Low Distortion Differential ADC DriverUS$ 7.8 - 8.5MOQ: 1000 Pieces
-
ADF4360-7BCPZRL7 ADI NEW and ORIGINAL 17+LFCSP24 (Integrated Synthesizer and VCO)US$ 3.5 - 4.5MOQ: 1000 Pieces
-
ADM3485EARZ-REEL7 ADI NEW and ORIGINAL 18+ SOP RS-485/RS-422 TransceiverUS$ 1.1 - 1.5MOQ: 1000 Pieces
-
AD780BRZ-REEL7 ADI NEW and ORIGINAL 18+SOP 2.5 V/3.0 V High Precision ReferenceUS$ 8.5 - 9.5MOQ: 750 Pieces
-
AD8313ARMZ-REEL7 ADI NEW and ORIGINAL 17+ MSOP 0.1 GHz TO 2.5 GHz, 70 dB Logarithmic Detector / ControllerUS$ 5.5 - 6.5MOQ: 1000 Pieces