Contact Platform Support
Help CenterOP291GSZ ADI NEW and ORIGINAL 16+ SOP ADI (Micropower Single-Supply RRIO Dual Op Amp)
Related Products
-
ADR421BRZ ADI NEW and ORIGINAL 17+ SOIC (Ultraprecision, Low Noise, 2.500 V XFET® Voltage References)US$ 3.8 - 3.9MOQ: 100 Pieces -
ADCMP361YRJZ-REEL7 ADI NEW and ORIGINAL 16+ SOT23 (Single 0.275% Comparator and Reference With Dual Polarity Outputs)US$ 1.0 - 1.5MOQ: 100 Pieces
-
AD823ARZ-RL ADI NEW and ORIGINAL 17+SOP (16 MHz, Rail-to-Rail FET Input Dual Amplifier)US$ 2.35 - 2.55MOQ: 100 Pieces
-
ADI AD7891ASZ-1 NEW and ORIGINAL 17+ QFP (12-Bit High Speed Data Acquisition System)US$ 15.5 - 16.5MOQ: 100 Pieces
-
OP4177ARZ ADI NEW and ORIGINAL (Precision Low Noise, Low Input Bias Current Quad Op Amp)US$ 1.7 - 1.8MOQ: 100 Pieces
the following example is for you reference.
OP291GSZ ADI
(New and Original)
(Micropower Single-Supply RRIO Dual Op Amp)
Features:
Single-Supply Operation: 2.7 V to 12 V
Wide Input Voltage Range
Rail-to-Rail Output Swing
Low Supply Current: 300 μA/Amp
Wide Bandwidth: 3 MHz
Slew Rate: 0.5 V/μs
Low Offset Voltage: 700 μV
No Phase Reversal
Technical details:
Product Details
the OP191, OP291 and OP491 are single, dual and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a 3 volt single supply as well as ±5 volt dual supplies.
Fabricated on Analog Devices' CBCMOS process, the OP191 family has a unique input stage that allows the input voltage to safely extend 10 volts beyond either supply without any phase inversion or latch-up. The output voltage swings to within millivolts of the supplies and continues to sink or source current all the way to the supplies.
Applications for these amplifiers include portable telecom equipment, power supply control and protection, and interface for transducers with wide output ranges. Sensors requiring a rail-to-rail input amplifier include Hall effect, piezo electric, and resistive transducers.
the ability to swing rail-to-rail at both the input and output enables designers to build multistage filters in single-supply systems and maintain high signal-to-noise ratios.
Send Inquiry to This Supplier
You May Also Like
-
ADM2483BRWZ-REEL ADI NEW and ORIGINAL 18+SOP (Half-Duplex, ICoupler Isolated RS-485 Transceiver)US$ 2.35 - 2.55MOQ: 1000 Pieces
-
AD8138ARMZ-REEL7 ADI NEW and ORIGINAL 18+MSOP Low Distortion Differential ADC DriverUS$ 7.8 - 8.5MOQ: 1000 Pieces
-
ADF4360-7BCPZRL7 ADI NEW and ORIGINAL 17+LFCSP24 (Integrated Synthesizer and VCO)US$ 3.5 - 4.5MOQ: 1000 Pieces
-
ADM3485EARZ-REEL7 ADI NEW and ORIGINAL 18+ SOP RS-485/RS-422 TransceiverUS$ 1.1 - 1.5MOQ: 1000 Pieces
-
AD780BRZ-REEL7 ADI NEW and ORIGINAL 18+SOP 2.5 V/3.0 V High Precision ReferenceUS$ 8.5 - 9.5MOQ: 750 Pieces
-
AD8313ARMZ-REEL7 ADI NEW and ORIGINAL 17+ MSOP 0.1 GHz TO 2.5 GHz, 70 dB Logarithmic Detector / ControllerUS$ 5.5 - 6.5MOQ: 1000 Pieces
-
ADM3490EARZ-REEL7 ADI NEW and ORIGINAL 17+ SOP-8 ESD-Protected, RS-485/RS-422 TransceiverUS$ 1.5 - 2.5MOQ: 1000 Pieces
-
AD7685CRMZRL7 ADI NEW and ORIGINAL 17+ MSOP ESD-Protected, RS-485/RS-422 TransceiverUS$ 15.5 - 16.5MOQ: 1000 Pieces
-
ADUM1402BRWZ-RL ADI NEW and ORIGINAL 17+ SOP Quad-Channel Digital Isolator (2/2 Channel Directionality)US$ 2.9 - 3..5MOQ: 1000 Pieces
-
ADI AD7689BCPZ-RL7 NEW and ORIGINAL 18+ LFCSP-20 (16-Bit, 8-Channel,250 KSPS PulSAR ADC)US$ 7.9 - 8.5MOQ: 1500 Pieces
