Contact Platform Support
Help CenterEngineering Plastics PE Strip
Related Products
-
Low Friction Wear Resistant Polyethylene Hdpe Sheet/board/plateUS$ 2 - 3.8MOQ: 100 Kilograms -
Uhmwpe Plastic rv Jack Pads Stabilizer Pads Utility Block rv AccessoriesUS$ 1.8 - 3.5MOQ: 100 Kilograms
-
Hdpe Rod/uhmwpe Rod Bars/plastic RodUS$ 2 - 3.8MOQ: 100 Kilograms
-
PE Extrusion Bars And RodsUS$ 2.2 - 3.2MOQ: 100 Kilograms
-
Wear Resistant Hdpe Linear Guide Rail, Plastic Linear Guide RailUS$ 2.2 - 3.5MOQ: 100 Kilograms
Main Properties:HMWPE properties:
--Highest abrasion resistance of any polymer, 6 times more wear resistant than steel
--Anti-Weather & Anti-Aging
--Self-lubricating, Very low coefficient of friction
--Excellent chemical & corrosion resistant
--superior impact resistant, Noise- absorption, Vibration-absorption
--High tensile Strength
--Non-Toxic and smell
--UV resistance
--Flame Retardant; Relatively low in water absorption
--Excellent electrical properties
--Good performance in resisting environment stress crack, 200 times of ordinary PE
--No adhesion
--Light weight and easier to handle and fix
--Cost efficient; Resulting in low energy consumption
--Does not rot, split or crack; 100% recyclable
--Great liner material for industrial material handling applications
--Easy Reprocessed plastic ground protection mat
-Creats an instant roadway over virtually any type of terrain – mud, sand, marshy, uneven or soft terrain
- Extremely durable to withstand vehicle weights up to 80 tons
- Tested in extremes of hot and cold climates
Property |
Unit |
Value |
Density |
g/cm3 |
0.93-0.96 |
Average molecular weight |
g/mol |
3million- 10 million |
Tensile strength (23°C in air) |
MPa |
22 |
Breaking strength |
MPa |
42 |
Tensile strain at break |
% |
600 |
Charpy impact strength (notched) |
mJ/mm2 |
No break |
Ball indentation hardness |
N/mm2 |
42 |
Shore D hardness |
-- |
65-70 |
Abrasion |
% |
70-80, steel = 100 |
Static Friction Coefficient |
-- |
≤0.16 |
Kinetic Friction Coefficient |
-- |
≤0.10 |
Water Absorption |
-- |
NIL |
Elongation at break at 23 degress |
% |
≥300 |
Temperature resistance |
°C |
-269 to +85 |
Melt Temperature |
°C |
130-140 |
Send Inquiry to This Supplier
You May Also Like
-
Uhmwpe Marine Fender StripUS$ 2.5 - 3.1MOQ: 1 Kilogram
-
Customized Hdpe Heavy Duty Jack Pad/ RV Jack Pad / Camper Jack PadsUS$ 2 - 3.5MOQ: 1 Kilogram
-
Uhmw pe Marine Fender PadUS$ 2 - 3MOQ: 1 Kilogram
-
Uhmwpe Crane Leg Pad/ Plastic Stabilizer Pad for CraneUS$ 2.2 - 3.5MOQ: 1 Kilogram
-
Customized Uhmwpe Marine Fender Pad/dock Fender Face PadUS$ 2.2 - 3.5MOQ: 100 Kilograms
-
Good Abrasion and Impact Resistant Uhmwpe Board / Plastic Slabs/ Hard Plastic Polyethylene PanelUS$ 2.2 - 3.8MOQ: 100 Kilograms
-
Uhmw pe Crane Leg Support Pad / Trailer Tongue Jack / Camper Jack PadsUS$ 20 - 35MOQ: 1 Piece
-
Uhmwpe Marine Fender Facing Pad / Uhmw pe Dock Fender Face Pad /US$ 2.5 - 3.8MOQ: 100 Kilograms
-
UPE Anti-slip Heavy Equipment Mud Mats / Ground Protection Mat / Temporary Road MatUS$ 2.2 - 3.8MOQ: 100 Kilograms
-
Wear Resistant Uhmw pe Guide, Plastic Guides Rail, Plastic Chain Guide PlateUS$ 2 - 5MOQ: 50 Kilograms
